What is a Well shaped spheroidization annealing furnace? Introduction to the Working Principle of Forging furnace

Well shaped spheroidization annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Commonly used inImprove production efficiency,Metal melting and casting,Energy conservation and environmental protection,Metal tempering,Metal forging heating and so on，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。The following is to introduce the Well shaped spheroidization annealing furnace:

1、Brief introduction of Well shaped spheroidization annealing furnace

Well shaped spheroidization annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，is a kind of high quality and low price Well shaped spheroidization annealing furnace，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is an ideal choice for customers to buy Well shaped spheroidization annealing furnace。

Well shaped spheroidization annealing furnace

2、Well shaped spheroidization annealing furnace function

Well shaped spheroidization annealing furnacemultifunctional, with functions such as normalizing, temper, hardening and tempering, anneal and quench，Widely used in Metal forging heating, Metal melting and casting, Energy conservation and environmental protection, Improve production efficiency and Metal heat treatment，It is a forging heating device using gas as fuel.，it is widely used in heat treatment, chemical industry, aerospace, material and electron，is carefully developed by One-combustion energy saving combined with advanced technology。

Well shaped spheroidization annealing furnace

3、Well shaped spheroidization annealing furnace application

Well shaped spheroidization annealing furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Well shaped spheroidization annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Well shaped spheroidization annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The Well shaped spheroidization annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Well shaped spheroidization annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Energy conservation and environmental protection

The Well shaped spheroidization annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Well shaped spheroidization annealing furnace

4、Well shaped spheroidization annealing furnace characteristics

The Well shaped spheroidization annealing furnace features are as follows:

1. Stable and reliable

The Well shaped spheroidization annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Well shaped spheroidization annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Strong adaptability

The Well shaped spheroidization annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Easy to maintain

The structural design of the Well shaped spheroidization annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Well shaped spheroidization annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Well shaped spheroidization annealing furnace

5、How much is the Well shaped spheroidization annealing furnace?

The Well shaped spheroidization annealing furnace price is introduced as follows:

1. Cost input

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Well shaped spheroidization annealing furnace will also be reduced.

2. market competition

The difference between the supply and demand of manufacturers and customers will also affect the Well shaped spheroidization annealing furnace price. When the demand of customers on the market increases and the supply of products by manufacturers is small, the Well shaped spheroidization annealing furnace price will increase with the increase of demand. On the contrary, when the supply of product manufacturers on the market exceeds the demand of customers, the Well shaped spheroidization annealing furnace price will decrease.

3. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Well shaped spheroidization annealing furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Well shaped spheroidization annealing furnace price can meet the purchasing needs of customers.

4. specifications and models

The same product, even with different specifications and models and different configurations, has different costs, so the price will be different.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Well shaped spheroidization annealing furnace

6、One-combustion energy saving delivery site

On-site aerial photography of Well shaped spheroidization annealing furnace。

Well shaped spheroidization annealing furnace

As you can see from the live video.One-combustion energy saving It is a forging heating device using gas as fuel.。

Well shaped spheroidization annealing furnaceIt has a wide range of uses, and is often used inEnergy conservation and environmental protection,Improve production efficiency,Metal heat treatment,Metal melting and casting,Metal tempering and so on，is a common Well shaped spheroidization annealing furnace，the product looks beautiful.。