Introduction to Stick type heating furnace, heating furnace advantages, characteristics and principles

Stick type heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。

1、Brief introduction of Stick type heating furnace

Stick type heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，favorable price。

Stick type heating furnace

2、Functional advantages of Stick type heating furnace

Stick type heating furnaces have the following advantages.

1. Wide application range

The Stick type heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Intelligent control

The Stick type heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Rapid temperature rise

The Stick type heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Multiple fuel options

Although the Stick type heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. easy to operate

The operation interface of the Stick type heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Stick type heating furnace

3、Structural advantages of Stick type heating furnace

The Stick type heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Stick type heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Stick type heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Stick type heating furnace

4、Stick type heating furnace use

The purpose of Stick type heating furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Stick type heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Stick type heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Stick type heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Stick type heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Stick type heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Stick type heating furnace

5、Stick type heating furnace advantage

The advantages of Stick type heating furnace are as follows:

1. Extend the service life of equipment

The Stick type heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Improve product quality

Because the Stick type heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Efficient combustion

The Stick type heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Stick type heating furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Extend the service life of equipment

The Stick type heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Stick type heating furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving, as one of the professional and powerful Stick type heating furnace manufacturers in Jinan, produces Stick type heating furnace with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

One-combustion energy saving

Stick type heating furnaceusually used in heat treatment, Machinery manufacturing, machinery, surface treatment, pharmacy and other fields，it is mainly composed of convection chamber, combustor, Radiation chamber, ventilation system and recovery of waste heat，This productSimple structure and advanced technology.。