Introduction to Full fiber high-temperature trolley forging heating furnace, Forging furnace specifications, model parameters

Full fiber high-temperature trolley forging heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks beautiful.，It has a wide range of uses, and is often used inMetal tempering,Metal forging heating,Metal melting and casting,Energy conservation and environmental protection,Improve production efficiency and so on。The following is to introduce the Full fiber high-temperature trolley forging heating furnace:

1、Brief introduction of Full fiber high-temperature trolley forging heating furnace

Full fiber high-temperature trolley forging heating furnaceIt is a forging heating device using gas as fuel.，it is widely used in war industry, shipping, chemical industry, automobile and Household necessities，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，The overall structural design is relatively simple，generally, it is composed of ventilation system, recovery of waste heat, convection chamber, combustor, Radiation chamber and other major components，Mainly used forMetal tempering,Metal heat treatment,Metal forging heating,Metal melting and casting andEnergy conservation and environmental protection。

Full fiber high-temperature trolley forging heating furnace

2、Full fiber high-temperature trolley forging heating furnace application

Full fiber high-temperature trolley forging heating furnaces have the following purposes.

1. Energy conservation and environmental protection

The Full fiber high-temperature trolley forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Full fiber high-temperature trolley forging heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Full fiber high-temperature trolley forging heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the Full fiber high-temperature trolley forging heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Full fiber high-temperature trolley forging heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Full fiber high-temperature trolley forging heating furnace

3、Full fiber high-temperature trolley forging heating furnace video live broadcast

On-site aerial photography of Full fiber high-temperature trolley forging heating furnace。

Full fiber high-temperature trolley forging heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。

4、Structural characteristics of Full fiber high-temperature trolley forging heating furnace

The Full fiber high-temperature trolley forging heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Full fiber high-temperature trolley forging heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. furnace chamber

A space for holding metallic materials for heating.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Full fiber high-temperature trolley forging heating furnace

5、How much is the Full fiber high-temperature trolley forging heating furnace?

The Full fiber high-temperature trolley forging heating furnace price is introduced as follows:

1. product model

With different specifications, the basic configuration of products will be different, and the price of products with high configuration will naturally be higher, otherwise the price will be lower, so there is a close relationship between specifications and prices.

2. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Full fiber high-temperature trolley forging heating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Full fiber high-temperature trolley forging heating furnace price can meet the purchasing needs of customers.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Full fiber high-temperature trolley forging heating furnace have more or less differences in price.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. cost of production

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. One-combustion energy saving has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

Full fiber high-temperature trolley forging heating furnace

6、One-combustion energy saving workshop real shot

Speak directly with facts on the spot。

Full fiber high-temperature trolley forging heating furnace

As you can see from the live video.One-combustion energy saving It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Full fiber high-temperature trolley forging heating furnacethe main structure includes ventilation system, furnace chamber, recovery of waste heat, convection chamber, furnace chamber and so on，is a common Full fiber high-temperature trolley forging heating furnace，usually used in pharmacy, building materials, metallurgy, petroleum, light industry and other fields。