What is a Heat treatment and tempering gas trolley furnace? How much is the price of the forging furnace?

Heat treatment and tempering gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a popular Heat treatment and tempering gas trolley furnace，is a kind of Heat treatment and tempering gas trolley furnace manufactured by One-combustion energy saving。The following is to introduce the Heat treatment and tempering gas trolley furnace:

1、Brief introduction of Heat treatment and tempering gas trolley furnace

Heat treatment and tempering gas trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as normalizing, quench, anneal, hardening and tempering and Forging heating，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is based on One-combustion energy saving is carefully developed by One-combustion energy saving combined with advanced technology。

Heat treatment and tempering gas trolley furnace

2、Heat treatment and tempering gas trolley furnace function

Heat treatment and tempering gas trolley furnaceit has the functions of heat treatment, heat treatment, anneal, Forging heating and normalizing，is a kind of high quality and low price Heat treatment and tempering gas trolley furnace，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Heat treatment and tempering gas trolley furnace

3、On-site real shot of Heat treatment and tempering gas trolley furnace

Heat treatment and tempering gas trolley furnace manufacturer, the product High definition real shot. In order to facilitate new and old customers to find satisfactory the product looks atmospheric. more quickly, the following high-definition pictures are provided for reference.。

Heat treatment and tempering gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Heat treatment and tempering gas trolley furnace application

Heat treatment and tempering gas trolley furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Heat treatment and tempering gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Improve production efficiency

The Heat treatment and tempering gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Heat treatment and tempering gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Heat treatment and tempering gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Heat treatment and tempering gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Heat treatment and tempering gas trolley furnace

5、How much is the Heat treatment and tempering gas trolley furnace?

The Heat treatment and tempering gas trolley furnace price is introduced as follows:

1. Low cost of raw materials

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Heat treatment and tempering gas trolley furnace will also be reduced.

2. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Heat treatment and tempering gas trolley furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Heat treatment and tempering gas trolley furnace price can meet the purchasing needs of customers.

3. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

4. market

The difference between the supply and demand of manufacturers and customers will also affect the Heat treatment and tempering gas trolley furnace price. When the demand of customers on the market increases and the supply of products by manufacturers is small, the Heat treatment and tempering gas trolley furnace price will increase with the increase of demand. On the contrary, when the supply of product manufacturers on the market exceeds the demand of customers, the Heat treatment and tempering gas trolley furnace price will decrease.

5. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

Heat treatment and tempering gas trolley furnace

6、One-combustion energy saving delivery site

The following is the live video of Heat treatment and tempering gas trolley furnace designed and produced by One-combustion energy saving for users, from which we can see the Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace. of Heat treatment and tempering gas trolley furnace.。

Heat treatment and tempering gas trolley furnace

As you can see from the live video.One-combustion energy saving It is an efficient, energy-saving and environment-friendly metal heating device.。

Heat treatment and tempering gas trolley furnacethe product looks atmospheric.，It has a wide range of uses, and is often used inMetal melting and casting,Metal tempering,Metal heat treatment,Improve production efficiency,Energy conservation and environmental protection and so on，features include Strong adaptability, Stable and reliable, Easy to maintain, Easy to control and Strong adaptability。