What is a Anchor chain continuous heat treatment furnace? Introduction to the advantages, characteristics, and principles of the heating furnace

Anchor chain continuous heat treatment furnaceIt is a forging heating device using gas as fuel.。

1、Brief introduction of Anchor chain continuous heat treatment furnace

Anchor chain continuous heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，multifunctional, with functions such as hardening and tempering, Casting heating, normalizing, heat treatment and temper，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Anchor chain continuous heat treatment furnace

2、Anchor chain continuous heat treatment furnace use

The purpose of Anchor chain continuous heat treatment furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Anchor chain continuous heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal tempering

By properly heating and cooling the metal material, the Anchor chain continuous heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Energy conservation and environmental protection

The Anchor chain continuous heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Anchor chain continuous heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Anchor chain continuous heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Anchor chain continuous heat treatment furnace

3、Anchor chain continuous heat treatment furnace advantage

The advantages of Anchor chain continuous heat treatment furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Uniform heating

The Anchor chain continuous heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Wide application range

The Anchor chain continuous heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Efficient combustion

The Anchor chain continuous heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Anchor chain continuous heat treatment furnace

4、Structural advantages of Anchor chain continuous heat treatment furnace

The Anchor chain continuous heat treatment furnace has the following structure

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Anchor chain continuous heat treatment furnace

5、Anchor chain continuous heat treatment furnace characteristics

The Anchor chain continuous heat treatment furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Anchor chain continuous heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Anchor chain continuous heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Anchor chain continuous heat treatment furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Strong adaptability

The Anchor chain continuous heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Anchor chain continuous heat treatment furnace

6、Anchor chain continuous heat treatment furnace price concessions

The Anchor chain continuous heat treatment furnace price is introduced as follows:

1. geographical position

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

2. model

One-combustion energy saving Anchor chain continuous heat treatment furnace has various specifications and models, and the prices of different specifications and models are also different. The main difference lies in the different technologies used in the products and the different manufacturing costs. One-combustion energy saving Preferential activities will be launched regularly, and the whole set of purchasing Anchor chain continuous heat treatment furnace will enjoy greater discounts

3. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Anchor chain continuous heat treatment furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Anchor chain continuous heat treatment furnace price can meet the purchasing needs of customers.

4. select a qualified person

The quality of material selection is one of the main factors that directly affect the Anchor chain continuous heat treatment furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

5. quality factor

The Anchor chain continuous heat treatment furnace is made of high-quality materials, and the cost of the product is high, so the price of the product will also rise. One-combustion energy saving has always adhered to high quality in the construction of Anchor chain continuous heat treatment furnace and won the trust of customers.

Anchor chain continuous heat treatment furnace

Anchor chain continuous heat treatment furnaceis a common Anchor chain continuous heat treatment furnace，Mainly used forMetal melting and casting,Improve production efficiency,Energy conservation and environmental protection,Metal forging heating andMetal tempering。