Introduction to Double beam walking industrial furnace and forging furnace advantages and features

Double beam walking industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a common Double beam walking industrial furnace。

1、Brief introduction of Double beam walking industrial furnace

Double beam walking industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，Commonly used inImprove production efficiency,Energy conservation and environmental protection,Metal tempering,Metal heat treatment,Improve production efficiency and so on，widely used inmetallurgy,surface treatment,shipping,pharmacy,aerospace and other industries，Cheap and high quality。

Double beam walking industrial furnace

2、Double beam walking industrial furnace structure

The Double beam walking industrial furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Double beam walking industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Double beam walking industrial furnace

3、Double beam walking industrial furnace characteristics

The Double beam walking industrial furnace features are as follows:

1. Efficient heating

The Double beam walking industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Strong adaptability

The Double beam walking industrial furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Efficient heating

The Double beam walking industrial furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Easy to maintain

The structural design of the Double beam walking industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Double beam walking industrial furnace

4、Double beam walking industrial furnace use

The purpose of Double beam walking industrial furnace is introduced as follows:

1. Metal forging heating

The Double beam walking industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Double beam walking industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Double beam walking industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal forging heating

The Double beam walking industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Double beam walking industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Double beam walking industrial furnace

5、Double beam walking industrial furnace field real shot

On-site aerial photography of Double beam walking industrial furnace。

Double beam walking industrial furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd multifunctional, with functions such as quench, normalizing, Casting heating, temper and hardening and tempering。

6、Double beam walking industrial furnace price concessions

The Double beam walking industrial furnace price is introduced as follows:

1. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Double beam walking industrial furnace price and service can meet the actual needs of customers.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Manufacturer's strength

Our factory is a direct selling manufacturer of Double beam walking industrial furnace, with independent production and processing facilities, few circulation links and low circulation cost.

4. regional difference

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Double beam walking industrial furnace

Double beam walking industrial furnaceit has the characteristics of energy saving and environmental protection, energy-efficient, Strong adaptability, Easy to maintain and Easy to control，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。