Introduction to Chain type continuous annealing furnace, introduction to heating furnace function advantages and characteristics

Chain type continuous annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Chain type continuous annealing furnace

Chain type continuous annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the functions of anneal, temper, normalizing, hardening and tempering and Casting heating，it is mainly composed of recovery of waste heat, Radiation chamber, combustor, furnace chamber and ventilation system，This Chain type continuous annealing furnaceThe overall structural design is relatively simple and compact.。

Chain type continuous annealing furnace

2、Introduction of advantages of Chain type continuous annealing furnace

The advantages of Chain type continuous annealing furnace are as follows:

1. Wide application range

The Chain type continuous annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. easy to operate

The operation interface of the Chain type continuous annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Intelligent control

The Chain type continuous annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Uniform heating

The Chain type continuous annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Chain type continuous annealing furnace

3、Chain type continuous annealing furnace use

The purpose of Chain type continuous annealing furnace is introduced as follows:

1. Energy conservation and environmental protection

The Chain type continuous annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Chain type continuous annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Improve production efficiency

The Chain type continuous annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The Chain type continuous annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Chain type continuous annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Chain type continuous annealing furnace

4、Chain type continuous annealing furnace use

The purpose of Chain type continuous annealing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Chain type continuous annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Chain type continuous annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Chain type continuous annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Chain type continuous annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Chain type continuous annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Chain type continuous annealing furnace

5、Chain type continuous annealing furnace characteristics

The Chain type continuous annealing furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Stable and reliable

The Chain type continuous annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Chain type continuous annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Efficient heating

The Chain type continuous annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Chain type continuous annealing furnace

6、Chain type continuous annealing furnace performance advantage

Chain type continuous annealing furnaces have the following advantages.

1. Improve product quality

Because the Chain type continuous annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Intelligent control

The Chain type continuous annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. easy to operate

The operation interface of the Chain type continuous annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Rapid temperature rise

The Chain type continuous annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Improve product quality

Because the Chain type continuous annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Chain type continuous annealing furnace

Chain type continuous annealing furnaceit has the structure of ventilation system, ventilation system, ventilation system, furnace chamber and recovery of waste heat，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。