Introduction to Steel chain stainless steel annealing furnace, Forging furnace specifications, model parameters

Steel chain stainless steel annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，multifunctional, with functions such as anneal, Casting heating, quench, temper and Forging heating。The following is to introduce the Steel chain stainless steel annealing furnace:

1、Brief introduction of Steel chain stainless steel annealing furnace

Steel chain stainless steel annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Steel chain stainless steel annealing furnace

2、Steel chain stainless steel annealing furnace application

Steel chain stainless steel annealing furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Steel chain stainless steel annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Improve production efficiency

The Steel chain stainless steel annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Steel chain stainless steel annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Steel chain stainless steel annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Steel chain stainless steel annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Steel chain stainless steel annealing furnace

3、Introduction of Steel chain stainless steel annealing furnace characteristics

Steel chain stainless steel annealing furnace has the following characteristics

1. Efficient heating

The Steel chain stainless steel annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Stable and reliable

The Steel chain stainless steel annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Steel chain stainless steel annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Efficient heating

The Steel chain stainless steel annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Steel chain stainless steel annealing furnace

4、Steel chain stainless steel annealing furnace performance advantage

The advantages of Steel chain stainless steel annealing furnace are as follows:

1. Wide application range

The Steel chain stainless steel annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Uniform heating

The Steel chain stainless steel annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Intelligent control

The Steel chain stainless steel annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Steel chain stainless steel annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Steel chain stainless steel annealing furnace

5、Working principle of Steel chain stainless steel annealing furnace

Steel chain stainless steel annealing furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a Steel chain stainless steel annealing furnace，It has the functions of Metal tempering, Metal melting and casting, Improve production efficiency, Metal forging heating and Improve production efficiency，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，is carefully developed by One-combustion energy saving combined with advanced technology。

Steel chain stainless steel annealing furnace

6、How much is the Steel chain stainless steel annealing furnace?

The Steel chain stainless steel annealing furnace price is introduced as follows:

1. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

2. Manufacturer's sales model

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. Low cost of raw materials

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Steel chain stainless steel annealing furnace just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

5. Model size

Different customers need different output, different specifications, different product configurations, and their Steel chain stainless steel annealing furnace prices are also different. The bigger the specification, the stronger the performance of the product and the higher the quotation.

Steel chain stainless steel annealing furnace

Steel chain stainless steel annealing furnaceIt can be used for Energy conservation and environmental protection, Metal tempering, Improve production efficiency, Energy conservation and environmental protection, Metal heat treatment, Metal forging heating and so on，energy-efficient,Easy to maintain,energy-efficient,Easy to control,energy saving and environmental protection，is a common Steel chain stainless steel annealing furnace。