What is a Forging furnace chamber type? Introduction to the principle of heating furnace structure

Forging furnace chamber typeIt is a forging heating device using gas as fuel.，the product looks beautiful.。

1、Brief introduction of Forging furnace chamber type

Forging furnace chamber typeIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Widely used inMetal tempering,Improve production efficiency,Metal melting and casting,Metal forging heating,Energy conservation and environmental protection and so on，the main features are Stable and reliable, Strong adaptability, Easy to control, energy saving and environmental protection and Strong adaptability。

Forging furnace chamber type

2、Forging furnace chamber type structure composition

The Forging furnace chamber type structure is introduced as follows:

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. furnace chamber

A space for holding metallic materials for heating.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Forging furnace chamber type heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Forging furnace chamber type

3、Introduction of Forging furnace chamber type characteristics

Forging furnace chamber type has the following characteristics

1. Easy to maintain

The structural design of the Forging furnace chamber type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Forging furnace chamber type has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Forging furnace chamber type can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Forging furnace chamber types are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Forging furnace chamber type

4、Forging furnace chamber type HD real picture

Overview of high-definition pictures,the product looks atmospheric.。

Forging furnace chamber type

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Forging furnace chamber type function

Forging furnace chamber typeit has the functions of quench, Casting heating, heat treatment, anneal and temper，the product looks atmospheric.，features include Easy to maintain, energy saving and environmental protection, energy-efficient, Easy to control and Stable and reliable，is a kind of high quality and low price Forging furnace chamber type，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

Forging furnace chamber type

6、Forging furnace chamber type use

The purpose of Forging furnace chamber type is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Forging furnace chamber type can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Forging furnace chamber types can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The Forging furnace chamber type can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The Forging furnace chamber type has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Forging furnace chamber type uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Forging furnace chamber type

Forging furnace chamber typeat runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks beautiful.，the product looks atmospheric.。