What is a Energy saving and environmentally friendly walking furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Energy saving and environmentally friendly walking furnaceIt is a forging heating device using gas as fuel.，it has the functions of temper, Casting heating, Forging heating, quench and heat treatment，the main features are Easy to maintain, Strong adaptability, Easy to control, Stable and reliable and Strong adaptability，favorable price。

1、Brief introduction of Energy saving and environmentally friendly walking furnace

Energy saving and environmentally friendly walking furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，be loved by our customers.。

Energy saving and environmentally friendly walking furnace

2、Energy saving and environmentally friendly walking furnace HD real shot

On-site aerial photography of Energy saving and environmentally friendly walking furnace。

Energy saving and environmentally friendly walking furnace

As you can see from the live video.，One-combustion energy saving in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

3、Energy saving and environmentally friendly walking furnace structure

The Energy saving and environmentally friendly walking furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly walking furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Energy saving and environmentally friendly walking furnace

4、Energy saving and environmentally friendly walking furnace characteristics

The Energy saving and environmentally friendly walking furnace features are as follows:

1. Stable and reliable

The Energy saving and environmentally friendly walking furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Efficient heating

The Energy saving and environmentally friendly walking furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the Energy saving and environmentally friendly walking furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Energy saving and environmentally friendly walking furnace

5、Energy saving and environmentally friendly walking furnace field real shot

Energy saving and environmentally friendly walking furnace are widely used. The following is a multi-directional display diagram of Energy saving and environmentally friendly walking furnace, and the details are full of quality and intelligence.。

Energy saving and environmentally friendly walking furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Introduction of advantages of Energy saving and environmentally friendly walking furnace

Energy saving and environmentally friendly walking furnaces have the following advantages.

1. Uniform heating

The Energy saving and environmentally friendly walking furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Rapid temperature rise

The Energy saving and environmentally friendly walking furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Multiple fuel options

Although the Energy saving and environmentally friendly walking furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Energy saving and environmentally friendly walking furnace can significantly reduce energy consumption, thus reducing operating costs.

Energy saving and environmentally friendly walking furnace

Energy saving and environmentally friendly walking furnacemultifunctional, with functions such as Casting heating, Forging heating, hardening and tempering, temper and normalizing，is a kind of high quality and low price Energy saving and environmentally friendly walking furnace。