What is a Walking beam forging furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Walking beam forging furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，usually used in surface treatment, electron, aerospace, petroleum, pharmacy and other fields，Mainly used forMetal heat treatment,Energy conservation and environmental protection,Improve production efficiency,Metal tempering andMetal melting and casting，generally, it is composed of Radiation chamber, furnace chamber, recovery of waste heat, ventilation system, combustor and other major components，productThe structural design is simple, novel and special.，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。

1、Brief introduction of Walking beam forging furnace

Walking beam forging furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Walking beam forging furnace

2、Walking beam forging furnace performance advantage

Walking beam forging furnaces have the following advantages.

1. Extend the service life of equipment

The Walking beam forging furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Intelligent control

The Walking beam forging furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Uniform heating

The Walking beam forging furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Walking beam forging furnace can significantly reduce energy consumption, thus reducing operating costs.

Walking beam forging furnace

3、Walking beam forging furnace function

Walking beam forging furnacemultifunctional, with functions such as hardening and tempering, Casting heating, anneal, Forging heating and normalizing，be loved by our customers.。

Walking beam forging furnace

4、Structural characteristics of Walking beam forging furnace

The Walking beam forging furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. furnace chamber

A space for holding metallic materials for heating.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Walking beam forging furnace

5、How much is the Walking beam forging furnace?

The Walking beam forging furnace price is introduced as follows:

1. Configuration level

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

2. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Walking beam forging furnace price and service can meet the actual needs of customers.

3. Manufacturer's strength

One-combustion energy saving is a self-produced and self-sold Walking beam forging furnace, and has rich experience in the production and manufacturing of Walking beam forging furnace. In the process of production and manufacturing, there is less waste of resources, and the corresponding product prices are also low.

4. market factors

Some external factors, such as market conditions, economic situation, industry rules, supply-demand relationship, etc., will also lead to certain fluctuations in Walking beam forging furnace prices, so this is also the main factor affecting prices.

5. Reasonable sales model

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

Walking beam forging furnace

6、One-combustion energy saving service

Users should not only consider the quality, performance and price factors when buying Walking beam forging furnace, but also consider the after-sales service of manufacturers. Good after-sales service can reduce many unnecessary troubles for customers. One-combustion energy saving manufacturers always adhere to the service attitude of "customer is God", implement high-standard and high-quality after-sales service attitude, conduct regular customer satisfaction surveys, and strictly supervise the quality of after-sales service, so as to relieve customers' purchase worries and make buyers completely worry-free.。

One-combustion energy saving

Walking beam forging furnaceIt has a wide range of uses, and is often used inMetal forging heating,Metal heat treatment,Improve production efficiency,Energy conservation and environmental protection,Metal tempering and so on，It is an efficient, energy-saving and environment-friendly metal heating device.。