Introduction to Medium temperature locomotive forging furnace in the foundry, introduction to forging furnace advantages and characteristics

Medium temperature locomotive forging furnace in the foundryIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，The overall structural design is relatively simple and compact.，structure mainly includes: combustor, ventilation system, convection chamber, furnace chamber, Radiation chamber and so on，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，features include Stable and reliable, Easy to control, energy-efficient, Strong adaptability and energy saving and environmental protection，It is mostly used in Energy conservation and environmental protection, Metal tempering, Improve production efficiency, Metal forging heating, Energy conservation and environmental protection, Metal heat treatment and so on。The following is to introduce the Medium temperature locomotive forging furnace in the foundry:

1、Brief introduction of Medium temperature locomotive forging furnace in the foundry

Medium temperature locomotive forging furnace in the foundryIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the functions of temper, hardening and tempering, quench, normalizing and Casting heating，the main structure includes combustor, recovery of waste heat, ventilation system, convection chamber, ventilation system and so on，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，be loved by our customers.。

Medium temperature locomotive forging furnace in the foundry

2、Advantages of Medium temperature locomotive forging furnace in the foundry principle

Medium temperature locomotive forging furnace in the foundrythe principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

Medium temperature locomotive forging furnace in the foundry

3、Medium temperature locomotive forging furnace in the foundry use

The purpose of Medium temperature locomotive forging furnace in the foundry is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Medium temperature locomotive forging furnace in the foundry can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal tempering

By properly heating and cooling the metal material, the Medium temperature locomotive forging furnace in the foundry can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal forging heating

The Medium temperature locomotive forging furnace in the foundry can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Medium temperature locomotive forging furnace in the foundry uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Medium temperature locomotive forging furnace in the foundry has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Medium temperature locomotive forging furnace in the foundry

4、Medium temperature locomotive forging furnace in the foundry display

The Medium temperature locomotive forging furnace in the foundry has a beautiful appearance and atmosphere for our customers' reference.。

Medium temperature locomotive forging furnace in the foundry

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Medium temperature locomotive forging furnace in the foundry price concessions

The Medium temperature locomotive forging furnace in the foundry price is introduced as follows:

1. Manufacturer's strength

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Medium temperature locomotive forging furnace in the foundry have more or less differences in price.

3. Configuration level

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Medium temperature locomotive forging furnace in the foundry has a higher cost performance.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. Reasonable cost

When the Medium temperature locomotive forging furnace in the foundry is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

Medium temperature locomotive forging furnace in the foundry

6、One-combustion energy saving after-sales service

One-combustion energy saving has perfect and reasonable after-sales service, which can solve customers' problems in a short time and reduce customers' losses. One-combustion energy saving can provide strong protection for customers in the later stage.。

One-combustion energy saving

Medium temperature locomotive forging furnace in the foundryit is widely used in chemical industry, petroleum, electron, building materials and machinery，multifunctional, with functions such as hardening and tempering, anneal, quench, heat treatment and Forging heating，Simple structure and reliable operation.，Structure consists of furnace chamber, recovery of waste heat, combustor, ventilation system, Radiation chamber and so on。