What is a Normalizing trolley heating furnace? Introduction to the advantages, characteristics, and principles of the heating furnace

Normalizing trolley heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，it is an ideal choice for customers to buy Normalizing trolley heating furnace。The following is to introduce the Normalizing trolley heating furnace:

1、Brief introduction of Normalizing trolley heating furnace

Normalizing trolley heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the main structure includes ventilation system, combustor, ventilation system, ventilation system, recovery of waste heat and so on，productThe structure is novel, special, advanced, reasonable and scientific.。

Normalizing trolley heating furnace

2、Structural advantages of Normalizing trolley heating furnace

The Normalizing trolley heating furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Radiation chamber

The heat load of the main place for Normalizing trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. furnace chamber

A space for holding metallic materials for heating.

Normalizing trolley heating furnace

3、Normalizing trolley heating furnace explanation video

On-site aerial photography of Normalizing trolley heating furnace。

Normalizing trolley heating furnace

As you can see from the live video.，One-combustion energy saving It is a forging heating device using gas as fuel.。

4、Normalizing trolley heating furnace customer scene picture

Normalizing trolley heating furnace specifications and models, novel design, beautiful appearance, for our customers to visit.。

Normalizing trolley heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of Normalizing trolley heating furnace characteristics

Normalizing trolley heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Normalizing trolley heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Normalizing trolley heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Normalizing trolley heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Strong adaptability

The Normalizing trolley heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Efficient heating

The Normalizing trolley heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Normalizing trolley heating furnace

6、Normalizing trolley heating furnace price consultation

The Normalizing trolley heating furnace price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Normalizing trolley heating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Normalizing trolley heating furnace price can meet the purchasing needs of customers.

2. Low cost of raw materials

When the Normalizing trolley heating furnace is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

3. Reasonable sales model

If there is no middleman to earn the difference, then the Normalizing trolley heating furnace price will naturally decrease. One-combustion energy saving adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

4. Manufacturer scale

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of Normalizing trolley heating furnace. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for Normalizing trolley heating furnace will be different.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Normalizing trolley heating furnace

Normalizing trolley heating furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as heat treatment, quench, anneal, Forging heating and normalizing，it has the characteristics of Strong adaptability, Easy to maintain, energy saving and environmental protection, energy-efficient and Easy to control。