Introduction to High temperature trolley forging heating furnace, advantages, characteristics and principles of forging furnace

High temperature trolley forging heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，widely used inbuilding materials,metallurgy,pharmacy,Machinery manufacturing,petroleum and other industries，structure mainly includes: ventilation system, convection chamber, Radiation chamber, combustor, furnace chamber and so on，productThe structural design is simple, novel and special.，it has the characteristics of energy saving and environmental protection, energy-efficient, Strong adaptability, Easy to maintain and energy-efficient，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。The following is to introduce the High temperature trolley forging heating furnace:

1、Brief introduction of High temperature trolley forging heating furnace

High temperature trolley forging heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a High temperature trolley forging heating furnace newly developed by One-combustion energy saving。

High temperature trolley forging heating furnace

2、Functional advantages of High temperature trolley forging heating furnace

High temperature trolley forging heating furnaces have the following advantages.

1. Rapid temperature rise

The High temperature trolley forging heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Multiple fuel options

Although the High temperature trolley forging heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Extend the service life of equipment

The High temperature trolley forging heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Wide application range

The High temperature trolley forging heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Intelligent control

The High temperature trolley forging heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

High temperature trolley forging heating furnace

3、High temperature trolley forging heating furnace application

High temperature trolley forging heating furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the High temperature trolley forging heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of High temperature trolley forging heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The High temperature trolley forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal heat treatment

In addition to forging heating, High temperature trolley forging heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal heat treatment

In addition to forging heating, High temperature trolley forging heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

High temperature trolley forging heating furnace

4、Advantages of High temperature trolley forging heating furnace principle

High temperature trolley forging heating furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is widely used insurface treatment,chemical industry,light industry,machinery,automobile and other industries，is carefully developed by One-combustion energy saving combined with advanced technology。

High temperature trolley forging heating furnace

5、High temperature trolley forging heating furnace structure

The High temperature trolley forging heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for High temperature trolley forging heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

High temperature trolley forging heating furnace

High temperature trolley forging heating furnacethe product looks beautiful.，It is a forging heating device using gas as fuel.。