Introduction to Trolley roaster and Forging furnace advantages and features

Trolley roasterIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，It has a wide range of uses, including Metal heat treatment, Metal tempering, Improve production efficiency, Metal forging heating and Energy conservation and environmental protection，be loved by our customers.。The following is to introduce the Trolley roaster:

1、Brief introduction of Trolley roaster

Trolley roasterIt is a forging heating device using gas as fuel.，widely used in surface treatment, aerospace, machinery, Machinery manufacturing, shipping and other fields。

Trolley roaster

2、Trolley roaster HD picture real shot

One-combustion energy saving Trolley roaster is completely upgraded, savoring the beauty of details.。

Trolley roaster

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of Trolley roaster characteristics

Trolley roaster has the following characteristics

1. Easy to maintain

The structural design of the Trolley roaster is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Trolley roasters are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Strong adaptability

The Trolley roaster can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Easy to control

The combustion system and ventilation system of the Trolley roaster can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Stable and reliable

The Trolley roaster has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Trolley roaster

4、Trolley roaster use

The purpose of Trolley roaster is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Trolley roaster can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Trolley roasters can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Improve production efficiency

The Trolley roaster has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Trolley roaster uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Trolley roaster can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Trolley roaster

5、Advantages of Trolley roaster principle

Trolley roasterThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has the functions of hardening and tempering, heat treatment, anneal, temper and quench，is an advanced Trolley roaster developed by our company in combination with the actual situation of the industry。

Trolley roaster

6、Trolley roaster quotation

The Trolley roaster price is introduced as follows:

1. regional advantages

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving located in Jinan. has convenient transportation, which provides a good convenience for the transportation of Trolley roaster.

2. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Trolley roaster price and service can meet the actual needs of customers.

3. Overall configuration

Usually, the quotation of Trolley roaster changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

4. Brand strength

At present, there are various brands of Trolley roaster in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Trolley roaster are different.

5. Manufacturer's strength

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

Trolley roaster

Trolley roasterthe product looks atmospheric.，multifunctional, with functions such as normalizing, Casting heating, heat treatment, anneal and hardening and tempering，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。