Introduction to Energy saving and environmentally friendly tube furnace, introduction to heating furnace advantages and characteristics

Energy saving and environmentally friendly tube furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，it has the functions of normalizing, Forging heating, Casting heating, quench and anneal，is a kind of Energy saving and environmentally friendly tube furnace manufactured by One-combustion energy saving。

1、Brief introduction of Energy saving and environmentally friendly tube furnace

Energy saving and environmentally friendly tube furnaceIt is a forging heating device using gas as fuel.。

Energy saving and environmentally friendly tube furnace

2、Structural characteristics of Energy saving and environmentally friendly tube furnace

The Energy saving and environmentally friendly tube furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly tube furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Energy saving and environmentally friendly tube furnace

3、Energy saving and environmentally friendly tube furnace application

Energy saving and environmentally friendly tube furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Energy saving and environmentally friendly tube furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Energy saving and environmentally friendly tube furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Improve production efficiency

The Energy saving and environmentally friendly tube furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal tempering

By properly heating and cooling the metal material, the Energy saving and environmentally friendly tube furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Energy conservation and environmental protection

The Energy saving and environmentally friendly tube furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Energy saving and environmentally friendly tube furnace

4、Advantages of Energy saving and environmentally friendly tube furnace principle

Energy saving and environmentally friendly tube furnacein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is mainly composed of Radiation chamber, Radiation chamber, ventilation system, convection chamber and recovery of waste heat，be loved by our customers.。

Energy saving and environmentally friendly tube furnace

5、Energy saving and environmentally friendly tube furnace price consultation

The Energy saving and environmentally friendly tube furnace price is introduced as follows:

1. Reasonable cost

The production cost is mainly the purchase of raw materials. One-combustion energy saving attaches great importance to the purchase of raw materials to ensure the comprehensive quality of products. Only excellent raw materials can produce excellent products, and the input cost of raw materials has a direct relationship with the formulation of product prices. Under the premise of ensuring excellent product performance, One-combustion energy saving strives to reduce the input cost of products, and customers are very satisfied with this.

2. Less intermediate links

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. market

The amount of customers' demand for Energy saving and environmentally friendly tube furnace in the market also has a great influence on the price. When there are many customers purchasing this product in the market and the supply quantity of manufacturers is small, the Energy saving and environmentally friendly tube furnace price will be very high. On the contrary, when fewer customers purchase this product, there will be a phenomenon of oversupply, and the price of Energy saving and environmentally friendly tube furnace will naturally be reduced.

5. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Energy saving and environmentally friendly tube furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Energy saving and environmentally friendly tube furnace price can meet the purchasing needs of customers.

Energy saving and environmentally friendly tube furnace

6、One-combustion energy saving company discount

Energy saving and environmentally friendly tube furnace is a new type of heating furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for metallurgy and other industries. Now consult One-combustion energy savingproduce的Energy saving and environmentally friendly tube furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Energy saving and environmentally friendly tube furnaceWidely used inMetal tempering,Metal heat treatment,Metal forging heating,Metal melting and casting,Energy conservation and environmental protection and so on，multifunctional, with functions such as temper, hardening and tempering, heat treatment, hardening and tempering and normalizing。