Introduction to Regenerative natural gas tube roasting furnace, introduction to forging furnace advantages and characteristics

Regenerative natural gas tube roasting furnaceIt is a forging heating device using gas as fuel.，usually used in automobile, heat treatment, material, surface treatment, metallurgy and other fields，Widely used inMetal tempering,Metal forging heating,Metal heat treatment,Improve production efficiency,Metal melting and casting and so on。

1、Brief introduction of Regenerative natural gas tube roasting furnace

Regenerative natural gas tube roasting furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

Regenerative natural gas tube roasting furnace

2、Regenerative natural gas tube roasting furnace video live broadcast

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Regenerative natural gas tube roasting furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks atmospheric.。

3、Regenerative natural gas tube roasting furnace structure composition

The Regenerative natural gas tube roasting furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Regenerative natural gas tube roasting furnace

4、Working principle of Regenerative natural gas tube roasting furnace

Regenerative natural gas tube roasting furnacethe principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，the product looks beautiful.。

Regenerative natural gas tube roasting furnace

5、Introduction of Regenerative natural gas tube roasting furnace characteristics

Regenerative natural gas tube roasting furnace has the following characteristics

1. Efficient heating

The Regenerative natural gas tube roasting furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Stable and reliable

The Regenerative natural gas tube roasting furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Regenerative natural gas tube roasting furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to maintain

The structural design of the Regenerative natural gas tube roasting furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Regenerative natural gas tube roasting furnace

6、How to choose the right product manufacturer?

Choosing a suitable Regenerative natural gas tube roasting furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Regenerative natural gas tube roasting furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Regenerative natural gas tube roasting furnacethe main features are Easy to maintain, energy-efficient, Easy to control, Stable and reliable and Strong adaptability，It is a forging heating device using gas as fuel.。