Introduction to Industrial furnace box type and forging furnace structure principle

Industrial furnace box typeIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the characteristics of Strong adaptability, Easy to maintain, energy saving and environmental protection, Strong adaptability and energy-efficient。The following is to introduce the Industrial furnace box type:

1、Brief introduction of Industrial furnace box type

Industrial furnace box typeIt is a forging heating device using gas as fuel.，it has been widely used in aerospace, light industry, shipping, war industry, material and other industries，Simple structure and advanced technology.，structure mainly includes: ventilation system, ventilation system, combustor, ventilation system, Radiation chamber and so on，support customization。

Industrial furnace box type

2、Industrial furnace box type characteristics

The Industrial furnace box type features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Efficient heating

The Industrial furnace box type can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to maintain

The structural design of the Industrial furnace box type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

The combustion system and ventilation system of the Industrial furnace box type can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Industrial furnace box type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Industrial furnace box type

3、Industrial furnace box type structure composition

The Industrial furnace box type has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for Industrial furnace box type heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Industrial furnace box type

4、Industrial furnace box type principle

Industrial furnace box typein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a common Industrial furnace box type，it can be used in metallurgy, chemical industry, heat treatment, automobile, surface treatment and other industries，it is an ideal choice for customers to buy Industrial furnace box type。

Industrial furnace box type

5、Industrial furnace box type display

Excellent material selection,the product looks beautiful., trustworthy, panoramic shooting, helpful for customer reference.。

Industrial furnace box type

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Industrial furnace box typeit is mainly composed of combustor, recovery of waste heat, furnace chamber, ventilation system and convection chamber，Industrial furnace box typeSimple structure and reliable operation.，It is an efficient, energy-saving and environment-friendly metal heating device.，is a kind of high quality and low price Industrial furnace box type。