Introduction to Rotary roasting furnace and heating furnace advantages and features

Rotary roasting furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Rotary roasting furnace

Rotary roasting furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Rotary roasting furnace

2、Structural advantages of Rotary roasting furnace

The Rotary roasting furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. Radiation chamber

The heat load of the main place for Rotary roasting furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Rotary roasting furnace

3、Rotary roasting furnace advantage

The advantages of Rotary roasting furnace are as follows:

1. Rapid temperature rise

The Rotary roasting furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Efficient combustion

The Rotary roasting furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Intelligent control

The Rotary roasting furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Efficient combustion

The Rotary roasting furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Improve product quality

Because the Rotary roasting furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Rotary roasting furnace

4、Working principle of Rotary roasting furnace

Rotary roasting furnacethe principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，structure mainly includes: combustor, Radiation chamber, ventilation system, recovery of waste heat, combustor and so on，was developed and designed by One-combustion energy saving。

Rotary roasting furnace

5、Rotary roasting furnace performance advantage

Rotary roasting furnaces have the following advantages.

1. Extend the service life of equipment

The Rotary roasting furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. easy to operate

The operation interface of the Rotary roasting furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Rapid temperature rise

The Rotary roasting furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Uniform heating

The Rotary roasting furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Rotary roasting furnace can significantly reduce energy consumption, thus reducing operating costs.

Rotary roasting furnace

6、How much is the Rotary roasting furnace?

The Rotary roasting furnace price is introduced as follows:

1. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Rotary roasting furnace have more or less differences in price.

3. company strength

There are many manufacturers of products in Jinan, Shandong province, and the strength, technology and after-sales of each manufacturer are different, so the quotation for Rotary roasting furnace is naturally different.

4. Parameter size

Customer needs are different, so the required product models will be different. Different product models and different performances will naturally lead to different Rotary roasting furnace prices.

5. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Rotary roasting furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Rotary roasting furnace price can meet the purchasing needs of customers.

Rotary roasting furnace

Rotary roasting furnaceis a kind of high quality and low price Rotary roasting furnace，it has the characteristics of Easy to control, Strong adaptability, Stable and reliable, energy-efficient and Easy to control。