Introduction to Rotary quenching industrial furnace, Forging furnace specifications, model parameters

Rotary quenching industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，It has the functions of Metal forging heating, Energy conservation and environmental protection, Improve production efficiency, Metal heat treatment and Metal melting and casting。The following is to introduce the Rotary quenching industrial furnace:

1、Brief introduction of Rotary quenching industrial furnace

Rotary quenching industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a Rotary quenching industrial furnace，it has been widely used in surface treatment, pharmacy, material, aerospace, Household necessities and other industries，has been favored by more and more customers.。

Rotary quenching industrial furnace

2、Rotary quenching industrial furnace principle

Rotary quenching industrial furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is an ideal choice for customers to buy Rotary quenching industrial furnace。

Rotary quenching industrial furnace

3、Rotary quenching industrial furnace function

Rotary quenching industrial furnaceit has the functions of quench, normalizing, Casting heating, quench and anneal，it is widely used inshipping,metallurgy,light industry,heat treatment,chemical industry and other industries，is a common Rotary quenching industrial furnace，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks atmospheric.。

Rotary quenching industrial furnace

4、Rotary quenching industrial furnace structure

The Rotary quenching industrial furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Rotary quenching industrial furnace

5、Rotary quenching industrial furnace use

The purpose of Rotary quenching industrial furnace is introduced as follows:

1. Metal forging heating

The Rotary quenching industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Rotary quenching industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Rotary quenching industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Rotary quenching industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Rotary quenching industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Rotary quenching industrial furnace

6、Introduction of One-combustion energy saving Company

One-combustion energy saving is a professional manufacturer of Forging furnace, which produces Rotary quenching industrial furnace with The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

Rotary quenching industrial furnaceIt has a wide range of uses, including Metal tempering, Metal heat treatment, Energy conservation and environmental protection, Improve production efficiency and Metal forging heating，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。