Introduction to Direct heating annealing furnace, advantages, characteristics and principles of Forging furnace

Direct heating annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a Direct heating annealing furnace，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，be loved by our customers.。The following is to introduce the Direct heating annealing furnace:

1、Brief introduction of Direct heating annealing furnace

Direct heating annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has been widely used in machinery, surface treatment, pharmacy, shipping, aerospace and other industries，it has the functions of hardening and tempering, temper, normalizing, quench and anneal，has been favored by more and more customers.。

Direct heating annealing furnace

2、Direct heating annealing furnace use

The purpose of Direct heating annealing furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Direct heating annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Improve production efficiency

The Direct heating annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Direct heating annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Direct heating annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Direct heating annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Direct heating annealing furnace

3、Direct heating annealing furnace function

Direct heating annealing furnacemultifunctional, with functions such as Forging heating, temper, anneal, normalizing and Casting heating，is a common Direct heating annealing furnace，energy-efficient,energy saving and environmental protection,Strong adaptability,Easy to control,Easy to maintain，customizable。

Direct heating annealing furnace

4、Direct heating annealing furnace field real shot

The design of One-combustion energy saving Direct heating annealing furnace is exquisite and elegant. Here are the high-definition pictures of One-combustion energy saving's factory products for our customers' reference. We need to make an appointment to visit the factory in advance for physical inspection.。

Direct heating annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Working principle of Direct heating annealing furnace

Direct heating annealing furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，The overall structural design is simple and novel.，Structure consists of combustor, convection chamber, ventilation system, recovery of waste heat, ventilation system and so on，usually used in material, war industry, electron, light industry, building materials and other fields，is carefully developed by One-combustion energy saving combined with advanced technology。

Direct heating annealing furnace

6、One-combustion energy saving workshop real shot

On-site aerial photography of Direct heating annealing furnace。

Direct heating annealing furnace

As you can see from the live video.One-combustion energy saving widely used inpetroleum,Machinery manufacturing,metallurgy,surface treatment,aerospace and other industries。

Direct heating annealing furnacethe main structure includes recovery of waste heat, furnace chamber, Radiation chamber, ventilation system, recovery of waste heat and so on，the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It is a forging heating device using gas as fuel.。