What is a Direct fired annealing industrial furnace? Forging furnace specifications, models, and parameters

Direct fired annealing industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the main features are Easy to maintain, Stable and reliable, Easy to control, energy saving and environmental protection and energy saving and environmental protection，the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is based on One-combustion energy saving is a Direct fired annealing industrial furnace newly developed by One-combustion energy saving。The following is to introduce the Direct fired annealing industrial furnace:

1、Brief introduction of Direct fired annealing industrial furnace

Direct fired annealing industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The structural design is simple, novel and special.，it mainly includes ventilation system, ventilation system, convection chamber, combustor and ventilation system，is a kind of high quality and low price Direct fired annealing industrial furnace，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，It has the functions of Metal forging heating, Metal tempering, Energy conservation and environmental protection, Improve production efficiency and Metal heat treatment。

Direct fired annealing industrial furnace

2、Direct fired annealing industrial furnace characteristics

The Direct fired annealing industrial furnace features are as follows:

1. Strong adaptability

The Direct fired annealing industrial furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Direct fired annealing industrial furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Efficient heating

The Direct fired annealing industrial furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Direct fired annealing industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The Direct fired annealing industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Direct fired annealing industrial furnace

3、Direct fired annealing industrial furnace function

Direct fired annealing industrial furnaceit has the functions of temper, quench, Casting heating, normalizing and heat treatment，The price is low and affordable，reliable quality。

Direct fired annealing industrial furnace

4、Direct fired annealing industrial furnace use

The purpose of Direct fired annealing industrial furnace is introduced as follows:

1. Metal forging heating

The Direct fired annealing industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Direct fired annealing industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The Direct fired annealing industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Direct fired annealing industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Direct fired annealing industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Direct fired annealing industrial furnace

5、How much is the Direct fired annealing industrial furnace?

The Direct fired annealing industrial furnace price is introduced as follows:

1. region

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

2. Reasonable sales model

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Direct fired annealing industrial furnace is low.

3. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

4. deploy

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Direct fired annealing industrial furnace has a higher cost performance.

5. market factors

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Direct fired annealing industrial furnace. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

Direct fired annealing industrial furnace

6、Why choose One-combustion energy saving?

Choosing a suitable Direct fired annealing industrial furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Direct fired annealing industrial furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Direct fired annealing industrial furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。