Introduction to Pull rod annealing furnace and Forging furnace advantages and features

Pull rod annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，usually used in shipping, light industry, surface treatment, chemical industry, petroleum and other fields，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，features include Stable and reliable, Easy to control, energy-efficient, Easy to maintain and Strong adaptability，It has a wide range of uses, and is often used inEnergy conservation and environmental protection,Improve production efficiency,Metal forging heating,Metal forging heating,Metal melting and casting and so on。The following is to introduce the Pull rod annealing furnace:

1、Brief introduction of Pull rod annealing furnace

Pull rod annealing furnaceIt is a forging heating device using gas as fuel.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，was developed and designed by One-combustion energy saving。

Pull rod annealing furnace

2、Pull rod annealing furnace application

The purpose of Pull rod annealing furnace is introduced as follows:

1. Metal forging heating

The Pull rod annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Pull rod annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Pull rod annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Pull rod annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal heat treatment

In addition to forging heating, Pull rod annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Pull rod annealing furnace

3、Pull rod annealing furnace function

Pull rod annealing furnaceit has the functions of anneal, quench, hardening and tempering, heat treatment and temper。

Pull rod annealing furnace

4、Introduction of advantages of Pull rod annealing furnace

The advantages of Pull rod annealing furnace are as follows:

1. Improve product quality

Because the Pull rod annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Multiple fuel options

Although the Pull rod annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Pull rod annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Wide application range

The Pull rod annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. easy to operate

The operation interface of the Pull rod annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Pull rod annealing furnace

5、Pull rod annealing furnace function

Pull rod annealing furnaceit has the functions of quench, hardening and tempering, Forging heating, temper and normalizing，the main structure includes recovery of waste heat, ventilation system, combustor, recovery of waste heat and combustor，it has the characteristics of Easy to control, Stable and reliable, Easy to maintain, energy saving and environmental protection and energy-efficient，it is widely used in pharmacy, machinery, metallurgy, war industry and aerospace，favorable price。

Pull rod annealing furnace

Pull rod annealing furnacethe product looks beautiful.，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，Commonly used inEnergy conservation and environmental protection,Metal heat treatment,Metal tempering,Improve production efficiency,Metal forging heating and so on。