What is a Fully automatic annealing heat treatment furnace? Introduction to the principle of forging furnace structure

Fully automatic annealing heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

1、Brief introduction of Fully automatic annealing heat treatment furnace

Fully automatic annealing heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a Fully automatic annealing heat treatment furnace，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，is a common Fully automatic annealing heat treatment furnace。

Fully automatic annealing heat treatment furnace

2、Fully automatic annealing heat treatment furnace performance advantage

Fully automatic annealing heat treatment furnaces have the following advantages.

1. easy to operate

The operation interface of the Fully automatic annealing heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Improve product quality

Because the Fully automatic annealing heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Extend the service life of equipment

The Fully automatic annealing heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Uniform heating

The Fully automatic annealing heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Fully automatic annealing heat treatment furnace

3、Fully automatic annealing heat treatment furnace characteristics

The Fully automatic annealing heat treatment furnace features are as follows:

1. Strong adaptability

The Fully automatic annealing heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Stable and reliable

The Fully automatic annealing heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Fully automatic annealing heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Fully automatic annealing heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Fully automatic annealing heat treatment furnace

4、Fully automatic annealing heat treatment furnace work site real shot

Details of One-combustion energy saving Fully automatic annealing heat treatment furnace,the product looks atmospheric.。

Fully automatic annealing heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Fully automatic annealing heat treatment furnace advantage

The advantages of Fully automatic annealing heat treatment furnace are as follows:

1. Multiple fuel options

Although the Fully automatic annealing heat treatment furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Improve product quality

Because the Fully automatic annealing heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Intelligent control

The Fully automatic annealing heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Efficient combustion

The Fully automatic annealing heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Rapid temperature rise

The Fully automatic annealing heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Fully automatic annealing heat treatment furnace

6、How much is the Fully automatic annealing heat treatment furnace?

The Fully automatic annealing heat treatment furnace price is introduced as follows:

1. Parameter size

Because of the different specifications of products, its price will be different, so its selling price is closely related to the model specifications, but the overall selling price of One-combustion energy saving is reasonable among similar products.

2. Configuration level

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

3. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Fully automatic annealing heat treatment furnace price and service can meet the actual needs of customers.

4. market

If there is a large demand for Fully automatic annealing heat treatment furnace in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

5. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Fully automatic annealing heat treatment furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Fully automatic annealing heat treatment furnace price can meet the purchasing needs of customers.

Fully automatic annealing heat treatment furnace

Fully automatic annealing heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the functions of hardening and tempering, Casting heating, quench, heat treatment and normalizing。