Introduction to Biomass fuel pellet transportation and Material conveying advantages and features

Biomass fuel pellet transportationis a kind of material conveying equipment which combines jet technology and fluidization technology.，the main features are Quantitative transportation, Can make full use of space, Avoid material pollution, High production efficiency and Easy maintenance，the principle is simple.It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.，The structural design is simple, novel and special.，it mainly includes Conveying pipeline system, delivery system, dust pelletizing system, control system and Air source system，was developed and designed by hyde。

1、Brief introduction of Biomass fuel pellet transportation

Biomass fuel pellet transportationmainly uses the airflow generated by the fan to transport materials along the airflow direction in the closed conveying pipeline.。

Biomass fuel pellet transportation

2、Biomass fuel pellet transportation application

Biomass fuel pellet transportations have the following purposes.

1. save energy and cut emissions

Although the Biomass fuel pellet transportation system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. cut down on energy consumption

Although the power consumption of the Biomass fuel pellet transportation is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. material handling

Biomass fuel pellet transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Environmental protection and cleaner production

The Biomass fuel pellet transportation process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

5. Process assistance

In some production processes, Biomass fuel pellet transportations are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Biomass fuel pellet transportation system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Biomass fuel pellet transportation

3、Structural advantages of Biomass fuel pellet transportation

The Biomass fuel pellet transportation has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Biomass fuel pellet transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Air source device

The air source device is the power core of the Biomass fuel pellet transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. control system

The control system is the "brain" of the Biomass fuel pellet transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Biomass fuel pellet transportation

4、Biomass fuel pellet transportation function

Biomass fuel pellet transportationit has the functions of Closed conveying, Explosion-proof involves, Closed conveying, Automatic control and Explosion-proof involves，the product looks atmospheric.，It can be used for Mixing and classification, material handling, Reduce pollution, Process assistance, Dust removal and essence, Environmental protection and cleaner production and so on，the advantage is In the process of conveying, various technological operations can be carried out at the same time, such as grade.、Can be charged at one place and then discharged at multiple places.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、Fully enclosed transportation system, materials are transported in closed pipes.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.，has been favored by more and more customers.。

Biomass fuel pellet transportation

5、Functional advantages of Biomass fuel pellet transportation

Biomass fuel pellet transportations have the following advantages.

1. Multi-point to multi-point transportation

The Biomass fuel pellet transportation system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

2. Generality

The Biomass fuel pellet transportation system can be suitable for all kinds of loose, dry and non-sticky materials, especially for some environmentally sensitive materials such as inflammable, explosive, toxic and harmful, and smelly, and can realize safe and reliable transportation.

3. Flexible layout

The conveying pipeline can be flexibly configured according to the factory layout and process requirements, and can meet the conveying requirements regardless of the horizontal, vertical or inclined direction. In addition, the Biomass fuel pellet transportation system can be seamlessly connected with other production equipment to improve the overall production efficiency.

4. High conveying efficiency and low cost.

The Biomass fuel pellet transportation system can realize the direct transportation of bulk materials without additional packaging and loading and unloading processes, thus significantly improving the transportation efficiency and reducing the cost of packaging, loading and unloading transportation.

5. Various process operations can be realized.

In the process of conveying, the Biomass fuel pellet transportation system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

Biomass fuel pellet transportation

6、Biomass fuel pellet transportation HD real shot

Provide a variety of specifications and models of Biomass fuel pellet transportation, high-definition picture list.。

Biomass fuel pellet transportation

Note: All the pictures in this article were taken by hyde powder manufacturer.。

Biomass fuel pellet transportationit is mainly composed of Bunker system, Conveying pipeline system, Bunker system, dust pelletizing system and control system，This productThe overall structural design is simple, diverse and beautiful.，in the course of work,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，It has a wide range of uses, and is often used inReduce pollution,material handling,Bulk material transportation,Mixing and classification,Multi-point transportation and so on。