What is a Chromium trioxide pneumatic conveying? pneumatic conveying specifications, models, and parameters

Chromium trioxide pneumatic conveyingis a material conveying device that uses the pressure of gas to convey powder materials.，the advantage is PLC intelligent control, high degree of automation and simple operation.、It can feed from one place to many places for decentralized transportation and realize long-distance operation.、Can realize the transportation of materials in a closed pipeline.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as be broken.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation，the principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。

1、Brief introduction of Chromium trioxide pneumatic conveying

Chromium trioxide pneumatic conveyingalso known as airflow transportation, is a way to transport granular materials along the airflow direction in a closed pipeline by using the energy of airflow.。

Chromium trioxide pneumatic conveying

2、Chromium trioxide pneumatic conveying structure

The Chromium trioxide pneumatic conveying structure is introduced as follows:

1. Air source device

The air source device is the power core of the Chromium trioxide pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Chromium trioxide pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Air source device

The air source device is the power core of the Chromium trioxide pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. control system

The control system is the "brain" of the Chromium trioxide pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Chromium trioxide pneumatic conveying

3、Chromium trioxide pneumatic conveying introduction video

You can buy Chromium trioxide pneumatic conveying according to your needs and show you Chromium trioxide pneumatic conveying videos.。

Chromium trioxide pneumatic conveying

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. The structural design is simple, novel and special.，the main structure includes Conveying pipeline system, Bunker system, dust pelletizing system, control system, Air source system and so on。

4、Chromium trioxide pneumatic conveying advantage

The advantages of Chromium trioxide pneumatic conveying are as follows:

1. Save space

Compared with other transportation modes, the Chromium trioxide pneumatic conveying system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

2. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Chromium trioxide pneumatic conveying occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

3. Structural construction

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

4. Strong flexibility

The conveying pipeline can be flexibly configured according to the factory layout and process requirements, and can meet the conveying requirements regardless of the horizontal, vertical or inclined direction. In addition, the Chromium trioxide pneumatic conveying system can be seamlessly connected with other production equipment to improve the overall production efficiency.

5. Low maintenance cost

The Chromium trioxide pneumatic conveying system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

Chromium trioxide pneumatic conveying

5、Chromium trioxide pneumatic conveying function

Chromium trioxide pneumatic conveyingmultifunctional, with functions such as Automatic control, Explosion-proof involves, Closed conveying, Physical processing assistance and Environmental protection and pollution-free，is a common Chromium trioxide pneumatic conveying，Can reduce the labor intensity,easy installation,automation,Flexible transmission line,The conveying speed is faster，It has the functions of Dust removal and essence, Mixing and classification, Environmental protection and cleaner production, Process assistance and Environmental protection and cleaner production，be of high quality。

Chromium trioxide pneumatic conveying

6、Chromium trioxide pneumatic conveying price advantage

The Chromium trioxide pneumatic conveying price is introduced as follows:

1. product quality

The quality of products provided by different manufacturers is different, so their prices will be different. Generally, large manufacturers provide products with higher quality, and the cost of technology and materials is more, so the price is relatively high. However, such products have better use effect and can bring longer-term benefits to customers.

2. market supply and demand

If there is a large demand for Chromium trioxide pneumatic conveying in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

3. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

4. Manufacturer's strength

Our factory has mature and perfect production technology, advanced and intelligent processing technology, abundant labor resources and low investment. Coupled with the influence of special geographical location, our company has invested much less in manpower, material resources and financial resources than other manufacturers.

5. Product technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Chromium trioxide pneumatic conveying

Chromium trioxide pneumatic conveyingfeatures include Fast conveying speed, Wide range of conveying materials, The failure rate is low, Long conveying distance and High productivity，is a popular Chromium trioxide pneumatic conveying。