Introduction to 304 stainless steel three-leaf Roots vacuum pump, advantages, characteristics and principles of the roots vacuum pump

304 stainless steel three-leaf Roots vacuum pumpis a kind of vacuum equipment that uses a pair of rotors (usually two impellers with special profile) that rotate synchronously and reversely in the pump cavity to extract gas.，it has been widely used in petrochemical industry, Textile light textile, port, power, port and other industries，has been favored by more and more customers.。The following is to introduce the 304 stainless steel three-leaf Roots vacuum pump:

1、Brief introduction of 304 stainless steel three-leaf Roots vacuum pump

304 stainless steel three-leaf Roots vacuum pumpis a common vacuum equipment.，it has the functions of Desulfurization oxidation, dehydrate, Pressurized transportation, pick up the suction and dry，Widely used invacuum drying,Vacuum extraction,Gas treatment,vacuum distillation,vacuum drying and so on。

304 stainless steel three-leaf Roots vacuum pump

2、Advantages of 304 stainless steel three-leaf Roots vacuum pump principle

304 stainless steel three-leaf Roots vacuum pumpat work,the suction, compression and exhaust processes are completed by synchronous high-speed rotation of two or more trilobal rotors in the pump cavity. The rotor consists of three blades, whose shapes and positions are symmetrical. When the motor is started, the two rotors start to rotate. Due to the symmetry of the design and position of the blades, air enters the pump body from the air inlet, and is gradually squeezed and discharged by the blades, forming a vacuum.，is a common 304 stainless steel three-leaf Roots vacuum pump，multifunctional, with functions such as sewage disposal, Desulfurization oxidation, exhaust emission, Pressurized transportation and cool，it is widely used in pottery and porcelain, sewage disposal, Pharmaceutical and chemical industries, pneumatic transport and water treatment，it has the characteristics of Smooth operation, high-effect, reliability, Easy to use and maintain. and Convenient manufacture。

304 stainless steel three-leaf Roots vacuum pump

3、304 stainless steel three-leaf Roots vacuum pump structure composition

The 304 stainless steel three-leaf Roots vacuum pump has the following structure

1. rotator

Rotor is the core component of the 304 stainless steel three-leaf Roots vacuum pump, and its profile design and machining accuracy directly affect the performance and service life of the pump.

2. bearing

Bearings are responsible for supporting the rotary motion of the rotor, and high-precision bearings are usually used to ensure the stable operation of the rotor.

3. sealing device

The sealing device is used to ensure that the gas in the pump cavity will not leak to the external environment.

4. pump body

Pump body is usually made of cast iron or cast steel, which has good strength and sealing performance.

5. gearing

The transmission device is usually driven by motor or reducer, which makes the rotor rotate relatively in the pump cavity.

304 stainless steel three-leaf Roots vacuum pump

4、304 stainless steel three-leaf Roots vacuum pump use

304 stainless steel three-leaf Roots vacuum pumpIt has a wide range of uses, including vacuum treatment, Vacuum extraction, Gas treatment, vacuum packaging and vacuum distillation，is a kind of vacuum equipment that uses a pair of rotors (usually two impellers with special profile) that rotate synchronously and reversely in the pump cavity to extract gas.，the product looks atmospheric.，the advantage is Because of the design of three-blade rotor, the 304 stainless steel three-leaf Roots vacuum pump has little vibration and low noise during operation, and the operation is stable and reliable、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Due to the adoption of synchronous gear transmission and small gap design, the 304 stainless steel three-leaf Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、Small size and small floor space make it easy to arrange and install in places with limited space.、In the process of air intake and exhaust, the 304 stainless steel three-leaf Roots vacuum pump will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.，it is an ideal choice for customers to buy 304 stainless steel three-leaf Roots vacuum pump。

304 stainless steel three-leaf Roots vacuum pump

5、304 stainless steel three-leaf Roots vacuum pump HD picture real shot

The 304 stainless steel three-leaf Roots vacuum pump looks beautiful and atmospheric, and it is realistic for customers to visit.。

304 stainless steel three-leaf Roots vacuum pump

Note: All the pictures in this article were taken by hyde manufacturer.。

304 stainless steel three-leaf Roots vacuum pumpIn the process of air intake and exhaust, the 304 stainless steel three-leaf Roots vacuum pump will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the 304 stainless steel three-leaf Roots vacuum pump less vibration and noise.，the principle is simple.mainly based on the relative rotational movement of the rotor in the pump chamber. There are two rotors in the pump, and a certain gap is kept between them and the inner wall of the pump shell. Through the rotation of the rotor, the gas is sucked in from the air inlet, and then discharged from the air outlet through the processes of compression and exhaust. Due to the special design of the rotor profile, the gas in the pump cavity is effectively compressed and discharged, thus achieving vacuum extraction.，It is mostly used in vacuum treatment, Vacuum extraction, vacuum drying, vacuum packaging, Gas treatment, vacuum distillation and so on。