Introduction to Lushi blower for biogas transportation, blower advantages, characteristics and principles

Lushi blower for biogas transportationthe models are complete and can meet the needs of different users for different purposes.。

1、Brief introduction of Lushi blower for biogas transportation

Lushi blower for biogas transportationthe models are complete and can meet the needs of different users for different purposes.，it is widely used in Food and beverage processing, petrochemical industry, Flue gas treatment, Textile light textile, port and other industries，is a popular Lushi blower for biogas transportation，the main structure includes bearing, rotator, case, muffler, wallboard and so on，has been favored by more and more customers.。

Lushi blower for biogas transportation

2、Advantages of Lushi blower for biogas transportation principle

Lushi blower for biogas transportationat runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，The overall structural design is relatively simple and compact.，it is mainly composed of bearing, muffler, rotator, impeller and wallboard，it is widely used inmanufacturing industry,aquaculture,petrochemical industry,Textile light textile,petrify and other industries，the main features are run smoothly, durable performance, Precise control, low noise and smooth operation，multifunctional, with functions such as pick up the suction, aeration, aquaculture, material fluidization and dry。

Lushi blower for biogas transportation

3、Introduction of advantages of Lushi blower for biogas transportation

The advantages of Lushi blower for biogas transportation are as follows:

1. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

2. Simple structure and convenient manufacture

The Lushi blower for biogas transportation is simple in design and easy to manufacture and maintain.

3. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

4. Durable performance

Impeller and shaft are integrated structure, and the impeller is not worn, so the performance of the fan is durable and can run continuously for a long time.

5. Long service life

The mechanical friction of the Lushi blower for biogas transportation is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

Lushi blower for biogas transportation

4、Lushi blower for biogas transportation structure

The Lushi blower for biogas transportation structure is introduced as follows:

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Lushi blower for biogas transportation enters and exits.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. impeller

It is the rotating part of the Lushi blower for biogas transportation, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Lushi blower for biogas transportation has gradually replaced the two-leaf Lushi blower for biogas transportation.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Lushi blower for biogas transportation enters and exits.

Lushi blower for biogas transportation

5、Introduction of Lushi blower for biogas transportation characteristics

Lushi blower for biogas transportationfeatures include energy-efficient, wide application range, low noise, stable and reliable and economical and durable，a rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，at work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，it is usually composed of case, fuel tank, bearing, case and impeller，This Lushi blower for biogas transportationThe overall structural design is relatively simple，was developed and designed by hyde。

Lushi blower for biogas transportation

6、Lushi blower for biogas transportation structure composition

The Lushi blower for biogas transportation has the following structure

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. impeller

It is the rotating part of the Lushi blower for biogas transportation, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Lushi blower for biogas transportation has gradually replaced the two-leaf Lushi blower for biogas transportation.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Lushi blower for biogas transportation, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Lushi blower for biogas transportation

Lushi blower for biogas transportationit has the characteristics of durable performance, convenient maintenance, smooth operation, convenient maintenance and convenient manufacture，in the course of work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.。