What is a Backwash Roots blower? Introduction to the principle of blower structure

Backwash Roots bloweris a positive displacement blower.，It is mostly used in cool, supply air, Material fluidization, material handling, mix, exhaust emission and so on，The structure is novel, special, advanced, reasonable and scientific.，it has the structure of fuel tank, wallboard, rotator, case and impeller，customizable。

1、Brief introduction of Backwash Roots blower

Backwash Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.。

Backwash Roots blower

2、Backwash Roots blower principle

Backwash Roots blowerat work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，the product looks beautiful.，is a Backwash Roots blower，it has the functions of material handling, dry, material fluidization, aeration and aquaculture，is a kind of Backwash Roots blower manufactured by hyde powder。

Backwash Roots blower

3、Backwash Roots blower performance advantage

Backwash Roots blowers have the following advantages.

1. Stable and reliable

The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Backwash Roots blower less vibration and noise.

2. Durable performance

The impeller and shaft of the Backwash Roots blower are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

3. energy-efficient

The Backwash Roots blower has high efficiency and can realize gas transportation and pressurization with low energy consumption.

4. Low noise and vibration

The three-leaf rotor structure of the Backwash Roots blower makes it less vibration and noise. This feature makes the Backwash Roots blower work normally in situations where a quiet environment is needed.

5. Convenient maintenance

The structure of the Backwash Roots blower is relatively simple and easy to maintain.

Backwash Roots blower

4、Backwash Roots blower structure composition

The Backwash Roots blower has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Backwash Roots blower enters and exits.

Backwash Roots blower

5、Backwash Roots blower application

Backwash Roots blowerCommonly used indry,sewage disposal,pick up the suction,aeration,Pressurized transportation and so on，the advantage is Because of the design of three-blade rotor, the Backwash Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、Due to the adoption of synchronous gear transmission and small gap design, the Backwash Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、In the process of air intake and exhaust, the Backwash Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Small size and small floor space make it easy to arrange and install in places with limited space.，is carefully developed by hyde combined with advanced technology。

Backwash Roots blower

6、Introduction of Backwash Roots blower characteristics

Backwash Roots blowerthe main features are wide application range, wide application range, be of simple construction, energy-efficient and Precise control，Widely used in dehydrate, Desulfurization oxidation, supply air, exhaust emission and mix。

Backwash Roots blower

Backwash Roots blowerthe product looks beautiful.，is a popular Backwash Roots blower。