What is a Roots blower for cement industry? Introduction to the principle of blower structure

Roots blower for cement industrythe models are complete and can meet the needs of different users for different purposes.，the principle is simple.The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.。The following is to introduce the Roots blower for cement industry:

1、Brief introduction of Roots blower for cement industry

Roots blower for cement industryis a positive displacement blower.，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots blower for cement industry less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Roots blower for cement industry perform well in many situations where stable airflow is needed.、In the process of air intake and exhaust, the Roots blower for cement industry will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the Roots blower for cement industry runs stably and reliably, without contact and wear parts, and has a long service life.、Small size and small floor space make it easy to arrange and install in places with limited space.，durable performance,wide application range,strong adaptability,run smoothly,stable and reliable，is carefully developed by hyde combined with advanced technology。

Roots blower for cement industry

2、Roots blower for cement industry use

Roots blower for cement industryWidely used incool,sewage disposal,aeration,Material fluidization,dry and so on，is a popular Roots blower for cement industry。

Roots blower for cement industry

3、Roots blower for cement industry characteristics

Roots blower for cement industrythe main features are low noise, convenient maintenance, wide application range, strong adaptability and economical and durable，is developed and improved by hyde powder。

Roots blower for cement industry

4、Structural characteristics of Roots blower for cement industry

The Roots blower for cement industry structure is introduced as follows:

1. muffler

Used to reduce the noise caused by airflow pulsation when the Roots blower for cement industry enters and exits.

2. impeller

It is the rotating part of the Roots blower for cement industry, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Roots blower for cement industry has gradually replaced the two-leaf Roots blower for cement industry.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Roots blower for cement industry, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Roots blower for cement industry

5、Working principle of Roots blower for cement industry

Roots blower for cement industryat runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，customizable。

Roots blower for cement industry

Roots blower for cement industryis a Roots blower for cement industry，it has the functions of cool, material handling, aeration, aquaculture and sewage disposal，it is usually composed of impeller, impeller, wallboard, rotator and bearing。