What is a Polystyrene pneumatic conveying system? Introduction to the advantages, characteristics, and principles of the pneumatic conveying

Polystyrene pneumatic conveying systemis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，support customization。The following is to introduce the Polystyrene pneumatic conveying system:

1、Brief introduction of Polystyrene pneumatic conveying system

Polystyrene pneumatic conveying systemis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，usually used in machine building, cast, metallurgy, chemical plant, pharmaceutical factory and other fields，was developed and designed by hyde。

Polystyrene pneumatic conveying system

2、Polystyrene pneumatic conveying system application

Polystyrene pneumatic conveying systems have the following purposes.

1. Long-distance and multipoint transportation

The Polystyrene pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Polystyrene pneumatic conveying systems have important application value in large factories and cross-regional material transportation.

2. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Polystyrene pneumatic conveying system pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

3. Dust removal and purification

The Polystyrene pneumatic conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

4. cut down on energy consumption

Although the power consumption of the Polystyrene pneumatic conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. save energy and cut emissions

Although the Polystyrene pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Polystyrene pneumatic conveying system

3、Polystyrene pneumatic conveying system HD real picture

Haide Polystyrene pneumatic conveying system manufacturing factory。

Polystyrene pneumatic conveying system

Note: All the pictures in this article were taken by hyde powder manufacturer.。

4、Advantages of Polystyrene pneumatic conveying system principle

Polystyrene pneumatic conveying systemthe principle is simple.Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.，High system reliability,automation,Economic and environmental protection,No secondary pollution,energy saving and environmental protection，is carefully developed by hyde combined with advanced technology。

Polystyrene pneumatic conveying system

5、Structural advantages of Polystyrene pneumatic conveying system

The Polystyrene pneumatic conveying system has the following structure

1. control system

The control system is the "brain" of the Polystyrene pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Polystyrene pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Polystyrene pneumatic conveying system

6、How much is the Polystyrene pneumatic conveying system?

The Polystyrene pneumatic conveying system price is introduced as follows:

1. market supply and demand

If there is a large demand for Polystyrene pneumatic conveying system in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. company strength

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

4. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Polystyrene pneumatic conveying system have more or less differences in price.

5. Configuration level

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. hyde powder pays special attention to the hardware configuration of products, so hyde Polystyrene pneumatic conveying system has a higher cost performance.

Polystyrene pneumatic conveying system

Polystyrene pneumatic conveying systemat runtime,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，the main features are Flexible transmission line, Easy maintenance, The conveying speed is faster, Save manpower and Long conveying distance，is a common Polystyrene pneumatic conveying system。