What is a Gypsum ash powder conveying system? Introduction to the advantages and characteristics of the Powder pneumatic conveying

Gypsum ash powder conveying systemis a reliable material conveying system for conveying powdery materials under high pressure.，It is suitable for centralized transportation to one place, and the feeding point can be one or several.、The operation mode is flexible and changeable, and it can run continuously or regularly.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、The materials are completely sealed during transportation.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.，is a Gypsum ash powder conveying system。The following is to introduce the Gypsum ash powder conveying system:

1、Brief introduction of Gypsum ash powder conveying system

Gypsum ash powder conveying systemis a material conveying system that uses the pressure of gas to convey powder materials.，Cheap and high quality。

Gypsum ash powder conveying system

2、Gypsum ash powder conveying system structure

The Gypsum ash powder conveying system structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. control system

The control system is the "brain" of the Gypsum ash powder conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Air source device

The air source device is the power core of the Gypsum ash powder conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Gypsum ash powder conveying system

3、Gypsum ash powder conveying system use

The purpose of Gypsum ash powder conveying system is introduced as follows:

1. Bulk material transportation

The Gypsum ash powder conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Gypsum ash powder conveying system, these materials can be efficiently transferred between different production links or equipment.

2. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Gypsum ash powder conveying system pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

3. save energy and cut emissions

Although the Gypsum ash powder conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. Reduce pollution

The Gypsum ash powder conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

5. Environmental protection and cleaner production

The Gypsum ash powder conveying system process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

Gypsum ash powder conveying system

4、Physical picture of Gypsum ash powder conveying system

hyde Gypsum ash powder conveying system is completely upgraded, savoring the beauty of details.。

Gypsum ash powder conveying system

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Gypsum ash powder conveying system characteristics

Gypsum ash powder conveying systemfeatures include It is convenient to realize mechanization, High production efficiency, Safe and reliable, Simple system and Reliable operation。

Gypsum ash powder conveying system

6、How much is the Gypsum ash powder conveying system?

The Gypsum ash powder conveying system price is introduced as follows:

1. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

2. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. Company size

There are many manufacturers of products in jinan, Shandong province, and the strength, technology and after-sales of each manufacturer are different, so the quotation for Gypsum ash powder conveying system is naturally different.

5. Different regions

The price of Gypsum ash powder conveying system in shandong(Province) is much lower than that in other regions, and hyde is a strong and professional Gypsum ash powder conveying systemManufacturer and seller not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Gypsum ash powder conveying system price positioning more reasonable, low-cost and economical.

Gypsum ash powder conveying system

Gypsum ash powder conveying systemIt can be used for Multi-point transportation, Reduce pollution, Mixing and classification, Long-distance and multipoint transportation, Bulk material transportation, Environmental protection and cleaner production and so on，The overall structural design is relatively simple，structure mainly includes: Conveying pipeline system, control system, Bunker system, Bunker system, delivery system and so on，it has been widely used in transportation, building material, environmental protection, plastic, build a ship and other industries。