What is a Dense phase positive pressure pneumatic conveying? How much is the price of the pneumatic conveying system?

Dense phase positive pressure pneumatic conveyingit uses the kinetic energy and pressure energy of air flow to transport materials from the starting point to the destination pipeline.，the product looks atmospheric.，Cheap and high quality。

1、Brief introduction of Dense phase positive pressure pneumatic conveying

Dense phase positive pressure pneumatic conveyingis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.。

Dense phase positive pressure pneumatic conveying

2、Dense phase positive pressure pneumatic conveying video

Speak directly with facts on the spot。

Dense phase positive pressure pneumatic conveying

As you can see from the live video.，hyde at runtime,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.。

3、Dense phase positive pressure pneumatic conveying use

The purpose of Dense phase positive pressure pneumatic conveying is introduced as follows:

1. Multi-point transportation

The Dense phase positive pressure pneumatic conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. material handling

Dense phase positive pressure pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Dense phase positive pressure pneumatic conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. Process assistance

In some production processes, Dense phase positive pressure pneumatic conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Dense phase positive pressure pneumatic conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

5. cut down on energy consumption

Although the power consumption of the Dense phase positive pressure pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Dense phase positive pressure pneumatic conveying

4、Structural characteristics of Dense phase positive pressure pneumatic conveying

The Dense phase positive pressure pneumatic conveying has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Air source device

The air source device is the power core of the Dense phase positive pressure pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. control system

The control system is the "brain" of the Dense phase positive pressure pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Dense phase positive pressure pneumatic conveying

5、How much is the Dense phase positive pressure pneumatic conveying?

The Dense phase positive pressure pneumatic conveying price is introduced as follows:

1. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Dense phase positive pressure pneumatic conveying price and service can meet the actual needs of customers.

2. regional advantages

hyde powder has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Dense phase positive pressure pneumatic conveying.

3. product quality

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

4. Proper management mode

hyde Dense phase positive pressure pneumatic conveying manufacturer is a large domestic Dense phase positive pressure pneumatic conveying manufacturer, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Dense phase positive pressure pneumatic conveying price is also low.

5. technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

Dense phase positive pressure pneumatic conveying

6、How to choose the right product manufacturer?

Choosing a suitable Dense phase positive pressure pneumatic conveying manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Dense phase positive pressure pneumatic conveying products that meet the demand and have good cost performance.。

hyde powder

Dense phase positive pressure pneumatic conveyingit mainly includes dust pelletizing system, control system, Bunker system, Conveying pipeline system and delivery system，it has the functions of Environmental protection and pollution-free, Physical processing assistance, material handling, Environmental protection and pollution-free and Explosion-proof involves。