Introduction to Dilute phase positive pressure conveying, introduction to Powder conveying advantages and characteristics

Dilute phase positive pressure conveyingis a kind of technical integrated system that uses air or gas flow as conveying power to convey bulk solid materials in pipelines.，Can be charged at one place, and then discharged at multiple places, and realize remote operation.、Fully enclosed transportation system, materials are transported in closed pipes.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、Large conveying capacity, long conveying distance and high conveying quality.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, and wide selection range.。The following is to introduce the Dilute phase positive pressure conveying:

1、Brief introduction of Dilute phase positive pressure conveying

Dilute phase positive pressure conveyingis a kind of material conveying system which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，be loved by our customers.。

Dilute phase positive pressure conveying

2、Dilute phase positive pressure conveying characteristics

Dilute phase positive pressure conveyingEfficient and flexible,Easy to automate management,versatility,High degree of automation,Flexible conveying distance，in the course of work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，It can be used for Reduce pollution, Environmental protection and cleaner production, Process assistance, Long-distance and multipoint transportation, Bulk material transportation, Multi-point transportation and so on，is designed by hyde powder with advanced technology。

Dilute phase positive pressure conveying

3、Working principle of Dilute phase positive pressure conveying

Dilute phase positive pressure conveyingat work,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，it has the characteristics of easy installation, automation, Centralized transportation, High production efficiency and System modularization。

Dilute phase positive pressure conveying

4、Structural advantages of Dilute phase positive pressure conveying

The Dilute phase positive pressure conveying structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Dilute phase positive pressure conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. control system

The control system is the "brain" of the Dilute phase positive pressure conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Dilute phase positive pressure conveying

5、Dilute phase positive pressure conveying HD real picture

Its appearance design is exquisite and elegant. The following is a high-definition picture of the factory for hyde's customers to choose and buy. You can contact online customer service at any time, make an appointment to visit the factory and take a shuttle bus from hyde powder.。

Dilute phase positive pressure conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

6、Dilute phase positive pressure conveying structure

The Dilute phase positive pressure conveying structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. control system

The control system is the "brain" of the Dilute phase positive pressure conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Dilute phase positive pressure conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Air source device

The air source device is the power core of the Dilute phase positive pressure conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Dilute phase positive pressure conveying

Dilute phase positive pressure conveyingthe product looks beautiful.，the advantage is Closed pipeline transportation，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、It is suitable for centralized transportation from many places to one place, with one or several feeding points, and realizes long-distance operation.、In the conveying process, various technological operations can be carried out at the same time.，mainly uses the airflow generated by the fan to transport materials along the airflow direction in the closed conveying pipeline.。