What is a Pneumatic conveying system for simultaneous suction and discharge of materials? Introduction to the advantages, characteristics, and principles of the pneumatic conveying system

Pneumatic conveying system for simultaneous suction and discharge of materialsis a material conveying system which uses the energy of airflow to convey granular materials in a closed pipeline.，in the course of work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，the principle is simple.Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.，Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as dust.、The material is completely closed in the whole conveying process.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、Can be transported from one point to one place or from one point to many points.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，is a kind of high quality and low price Pneumatic conveying system for simultaneous suction and discharge of materials。

1、Brief introduction of Pneumatic conveying system for simultaneous suction and discharge of materials

Pneumatic conveying system for simultaneous suction and discharge of materialsis a technology to transport solid particulate materials through air flow.，is carefully developed by hyde combined with advanced technology。

Pneumatic conveying system for simultaneous suction and discharge of materials

2、Pneumatic conveying system for simultaneous suction and discharge of materials structure

The Pneumatic conveying system for simultaneous suction and discharge of materials structure is introduced as follows:

1. Air source device

The air source device is the power core of the Pneumatic conveying system for simultaneous suction and discharge of materials system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. control system

The control system is the "brain" of the Pneumatic conveying system for simultaneous suction and discharge of materials system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Pneumatic conveying system for simultaneous suction and discharge of materials

3、Working principle of Pneumatic conveying system for simultaneous suction and discharge of materials

Pneumatic conveying system for simultaneous suction and discharge of materialsat the start of the operation,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，usually used in chemical plant, grain processing, cast, pharmaceutical factory, grain processing and other fields。

Pneumatic conveying system for simultaneous suction and discharge of materials

4、Pneumatic conveying system for simultaneous suction and discharge of materials advantage

Pneumatic conveying system for simultaneous suction and discharge of materialss have the following advantages.

1. High conveying efficiency and low cost.

The Pneumatic conveying system for simultaneous suction and discharge of materials can convey materials continuously and stably, and the conveying speed is faster, which improves the production efficiency and conveying capacity.

2. Easy to maintain

The Pneumatic conveying system for simultaneous suction and discharge of materials device has the advantages of simple structure, few moving parts, convenient maintenance and reduced maintenance cost. At the same time, the equipment occupies a small area and can make full use of space.

3. Material quality protection

In the process of conveying, the Pneumatic conveying system for simultaneous suction and discharge of materials can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

4. Save space

Pneumatic conveying system for simultaneous suction and discharge of materials equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

5. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Pneumatic conveying system for simultaneous suction and discharge of materials occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

Pneumatic conveying system for simultaneous suction and discharge of materials

5、How much is the Pneumatic conveying system for simultaneous suction and discharge of materials?

The Pneumatic conveying system for simultaneous suction and discharge of materials price is introduced as follows:

1. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

2. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde powder Pneumatic conveying system for simultaneous suction and discharge of materials manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Pneumatic conveying system for simultaneous suction and discharge of materials price can meet the purchasing needs of customers.

3. manufacturing cost

When the Pneumatic conveying system for simultaneous suction and discharge of materials is produced, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

4. technology content

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

5. Product configuration difference

The difference in Pneumatic conveying system for simultaneous suction and discharge of materials configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

Pneumatic conveying system for simultaneous suction and discharge of materials

6、Company selection skills

Choosing a suitable Pneumatic conveying system for simultaneous suction and discharge of materials manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Pneumatic conveying system for simultaneous suction and discharge of materials products that meet the demand and have good cost performance.。

hyde

Pneumatic conveying system for simultaneous suction and discharge of materialsit can be used in machine building, plastic, logistics, build a ship, building materials and other industries，multifunctional, with functions such as Explosion-proof involves, material handling, Physical processing assistance, Environmental protection and pollution-free and Automatic control。