What is a Two stage three leaf Roots vacuum pump? blower specifications, models, and parameters

Two stage three leaf Roots vacuum pumpis a positive displacement blower with forced gas transmission characteristics.，at work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，convenient maintenance,wide application range,low noise,run smoothly,energy-efficient，Widely used insupply air,dry,pick up the suction,Desulfurization oxidation,aquaculture and so on，it has the characteristics of wide application range, convenient manufacture, be of simple construction, stable and reliable and wide application range。The following is to introduce the Two stage three leaf Roots vacuum pump:

1、Brief introduction of Two stage three leaf Roots vacuum pump

Two stage three leaf Roots vacuum pumpthe models are complete and can meet the needs of different users for different purposes.，multifunctional, with functions such as material handling, mix, pick up the suction, pressurized transportation and sewage disposal。

Two stage three leaf Roots vacuum pump

2、Structural advantages of Two stage three leaf Roots vacuum pump

The Two stage three leaf Roots vacuum pump has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Two stage three leaf Roots vacuum pump, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

5. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

Two stage three leaf Roots vacuum pump

3、Two stage three leaf Roots vacuum pump explanation video

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Two stage three leaf Roots vacuum pump production process and production site, and gain favorable comments and recognition from customers.。

Two stage three leaf Roots vacuum pump

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. Simple structure and advanced technology.，it has the structure of bearing, impeller, fuel tank, rotator and muffler。

4、Two stage three leaf Roots vacuum pump characteristics

Two stage three leaf Roots vacuum pumpthe main features are durable performance, wide application range, be of simple construction, run smoothly and energy-efficient。

Two stage three leaf Roots vacuum pump

5、Two stage three leaf Roots vacuum pump price advantage

The Two stage three leaf Roots vacuum pump price is introduced as follows:

1. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

2. type of operation

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

3. product configuration

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

4. market quotation

If there is a large demand for Two stage three leaf Roots vacuum pump in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

5. Cost input

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Two stage three leaf Roots vacuum pump will also fluctuate to some extent.

Two stage three leaf Roots vacuum pump

6、hyde powder workshop real shot

The following is the live video of Two stage three leaf Roots vacuum pump designed and produced by hyde for users, from which we can see the The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Two stage three leaf Roots vacuum pump less vibration and noise.、In the process of air intake and exhaust, the Two stage three leaf Roots vacuum pump will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Two stage three leaf Roots vacuum pump perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Two stage three leaf Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise. of Two stage three leaf Roots vacuum pump.。

Two stage three leaf Roots vacuum pump

As you can see from the live video.hyde powder the product looks beautiful.。

Two stage three leaf Roots vacuum pumpit is usually composed of fuel tank, bearing, muffler, case and case，it has the functions of ventilation, exhaust emission, cool, aeration and desulfurization oxidation，is a kind of high quality and low price Two stage three leaf Roots vacuum pump。