Introduction to Material bolt type conveying equipment and Powder conveying structure principle

Material bolt type conveying equipmentmainly based on aerodynamic force, granular materials are transported along the airflow direction in a closed pipeline by using the energy of airflow.，In the process of conveying, various technological operations can be carried out at the same time, such as mix.、The conveying system is closed.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、Multi-point feeding and multi-point discharging are possible.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.，at work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，It has a wide range of uses, and is often used inLong distance transportation,Long distance transportation,cut down on energy consumption,Reduce pollution,Multi-point transportation and so on，it is widely used inheat-engine plant,build a ship,metallurgy,power,building material and other industries。The following is to introduce the Material bolt type conveying equipment:

1、Brief introduction of Material bolt type conveying equipment

Material bolt type conveying equipmentis a material conveying technology for conveying granular particles in a pipeline by means of compressed air flow.，Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、The whole conveying process is sealed.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、Can be transported from point to point or from point to point, and realize long-distance operation.、High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation、Materials are transported by closed pipelines.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.。

Material bolt type conveying equipment

2、Material bolt type conveying equipment structure composition

The Material bolt type conveying equipment has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. control system

The control system is the "brain" of the Material bolt type conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Material bolt type conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Material bolt type conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Material bolt type conveying equipment

3、Material bolt type conveying equipment use

The purpose of Material bolt type conveying equipment is introduced as follows:

1. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Material bolt type conveying equipment pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

2. Bulk material transportation

The Material bolt type conveying equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Material bolt type conveying equipment, these materials can be efficiently transferred between different production links or equipment.

3. save energy and cut emissions

Although the Material bolt type conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. Mixing and classification

In the process of conveying, the Material bolt type conveying equipment system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

5. material handling

Material bolt type conveying equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Material bolt type conveying equipment

4、Material bolt type conveying equipment explanation video

The following is the live video of Material bolt type conveying equipment designed and produced by hyde powder for users, from which we can see the the advantage is In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as dust.、Can be fed from one place to many places for decentralized transportation.、Closed pipeline transportation，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、Large conveying capacity, long conveying distance and high conveying quality.、In the process of conveying, various technological operations can be carried out at the same time, such as dry. of hydeproduce的Material bolt type conveying equipment.。

Material bolt type conveying equipment

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. It uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.。

5、Advantages of Material bolt type conveying equipment principle

Material bolt type conveying equipmentin the course of work,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.，the product looks atmospheric.，the advantage is In the conveying process, various technological operations can be carried out at the same time.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.、Can realize the transportation of materials in a closed pipeline.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、In the conveying process, various technological operations can be carried out at the same time.，It can be used for Bulk material transportation, Mixing and classification, material handling, Environmental protection and cleaner production, Heating, cooling and drying, Long-distance and multipoint transportation and so on，is designed by hyde with advanced technology。

Material bolt type conveying equipment

6、How much is the Material bolt type conveying equipment?

The Material bolt type conveying equipment price is introduced as follows:

1. Sales model

hyde powder Material bolt type conveying equipment manufacturer is a self-produced and self-selling manufacturer, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Material bolt type conveying equipment price is also low.

2. Manufacturer's strength

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Material bolt type conveying equipment is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Material bolt type conveying equipment is much higher, so customers should choose products directly sold by manufacturers when purchasing.

3. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

4. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

5. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

Material bolt type conveying equipment

Material bolt type conveying equipmentit has the structure of Conveying pipeline system, delivery system, Air source system, Bunker system and control system，it has the functions of Explosion-proof involves, Automatic control, Environmental protection and pollution-free, material handling and Physical processing assistance，the product looks beautiful.。