Introduction to Centralized feeding equipment and Powder conveying working principle

Centralized feeding equipmentthat is, the technology of conveying granular materials in closed pipes by air flow.，The overall structural design is relatively simple，Structure consists of Bunker system, dust pelletizing system, Conveying pipeline system, delivery system, Air source system and so on。

1、Brief introduction of Centralized feeding equipment

Centralized feeding equipmentis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，the product looks beautiful.，usually used in heat-engine plant, build a ship, pharmaceutical factory, machine building, plastic and other fields，modern technology。

Centralized feeding equipment

2、Centralized feeding equipment introduction video

The following is the live video of Centralized feeding equipment designed and produced by hyde powder for users, from which we can see the In the process of conveying, various technological operations can be carried out at the same time, such as mix.、Materials are transported in a closed pipeline.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as smash.、Closed pipeline transportation，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.、Single-point unloading and multi-point unloading can be realized, and remote operation can be realized. of hyde powderCentralized feeding equipment.。

Centralized feeding equipment

As you can see from the live video.，hyde Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。

3、Structural characteristics of Centralized feeding equipment

The Centralized feeding equipment structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. control system

The control system is the "brain" of the Centralized feeding equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Air source device

The air source device is the power core of the Centralized feeding equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Centralized feeding equipment

4、Centralized feeding equipment use

The purpose of Centralized feeding equipment is introduced as follows:

1. Bulk material transportation

The Centralized feeding equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Centralized feeding equipment, these materials can be efficiently transferred between different production links or equipment.

2. material handling

Centralized feeding equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. Long distance transportation

The Centralized feeding equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

4. Multi-point transportation

The Centralized feeding equipment system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. Process assistance

In some production processes, Centralized feeding equipments are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Centralized feeding equipment system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Centralized feeding equipment

5、Centralized feeding equipment characteristics

Centralized feeding equipmentthe main features are Operation safety, be of simple construction, Simple system, The failure rate is low and Can reduce the labor intensity，the advantage is PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、Materials are transported in a closed pipeline.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、It can be discharged at a single point or at multiple points.、In the conveying process, various technological operations can be carried out at the same time.。

Centralized feeding equipment

Centralized feeding equipmentit is widely used in medicine, heat-engine plant, grain processing, building materials and pharmaceutical factory，the product looks atmospheric.。