Introduction to PTFE Conveyor, introduction to Material conveying function advantages and characteristics

PTFE ConveyorIt uses air energy to continuously convey powder and bulk materials.，Mainly used forEnvironmental protection and cleaner production,Bulk material transportation,Long distance transportation,Heating, cooling and drying andcut down on energy consumption，the advantage is It can feed from one place to many places for decentralized transportation and realize long-distance operation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、The material is completely closed in the whole conveying process.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、Can be transported from point to point or from point to point, and realize long-distance operation.，it is an ideal choice for customers to buy PTFE Conveyor。

1、Brief introduction of PTFE Conveyor

PTFE Conveyoris a material conveying system that uses the pressure of gas to convey powder materials.，is a popular PTFE Conveyor，widely used in logistics, power, environmental protection, transportation, cast and other fields，the principle is simple.Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，is designed by hyde with advanced technology。

PTFE Conveyor

2、Structural characteristics of PTFE Conveyor

The PTFE Conveyor has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. control system

The control system is the "brain" of the PTFE Conveyor system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of PTFE Conveyor system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. control system

The control system is the "brain" of the PTFE Conveyor system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

PTFE Conveyor

3、PTFE Conveyor application

PTFE Conveyors have the following purposes.

1. Long-distance and multipoint transportation

The PTFE Conveyor system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes PTFE Conveyors have important application value in large factories and cross-regional material transportation.

2. Bulk material transportation

The PTFE Conveyor is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the PTFE Conveyor, these materials can be efficiently transferred between different production links or equipment.

3. Long distance transportation

The PTFE Conveyor system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

4. Environmental protection and cleaner production

The PTFE Conveyor process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

5. material handling

PTFE Conveyor system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

PTFE Conveyor

4、PTFE Conveyor function

PTFE Conveyormultifunctional, with functions such as Environmental protection and pollution-free, material handling, Physical processing assistance, Automatic control and Closed conveying，It is mostly used in material handling, Dust removal and essence, Mixing and classification, Multi-point transportation, Reduce pollution, Process assistance and so on。

PTFE Conveyor

5、Introduction of advantages of PTFE Conveyor

PTFE Conveyors have the following advantages.

1. structure

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

2. Multi-point to multi-point transportation

The PTFE Conveyor system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

3. Wide application range

PTFE Conveyors are suitable for conveying powdery, granular or flowable materials, and are suitable for many industries, such as chemical industry, building materials and food. And the PTFE Conveyor system can keep stable and continuous flow in long-distance transportation, thus meeting the production needs.

4. Efficient continuous transportation

Can transport materials quickly and in large quantities.

5. Save space

Compared with other transportation modes, the PTFE Conveyor system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

PTFE Conveyor

6、PTFE Conveyor use

The purpose of PTFE Conveyor is introduced as follows:

1. Mixing and classification

In the process of conveying, the PTFE Conveyor system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

2. cut down on energy consumption

Although the power consumption of the PTFE Conveyor is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. Multi-point transportation

The PTFE Conveyor system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. Long-distance and multipoint transportation

The PTFE Conveyor system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes PTFE Conveyors have important application value in large factories and cross-regional material transportation.

5. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the PTFE Conveyor pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

PTFE Conveyor

PTFE Conveyorthe main features are Stable operation, High degree of automation, Wide range of conveying materials, Operation safety and Reliable equipment，it is mainly composed of dust pelletizing system, Air source system, Bunker system, Conveying pipeline system and delivery system，the product looks beautiful.。