What is a Isothermal normalizing furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Isothermal normalizing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Simple structure and advanced technology.，it is mainly composed of ventilation system, Radiation chamber, recovery of waste heat, furnace chamber and ventilation system。The following is to introduce the Isothermal normalizing furnace:

1、Brief introduction of Isothermal normalizing furnace

Isothermal normalizing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，is a popular Isothermal normalizing furnace，is designed by One-combustion energy saving with advanced technology。

Isothermal normalizing furnace

2、Working principle of Isothermal normalizing furnace

Isothermal normalizing furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，widely used in pharmacy, machinery, material, war industry, chemical industry and other fields。

Isothermal normalizing furnace

3、Introduction of Isothermal normalizing furnace characteristics

Isothermal normalizing furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Isothermal normalizing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Strong adaptability

The Isothermal normalizing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Easy to maintain

The structural design of the Isothermal normalizing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Isothermal normalizing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Isothermal normalizing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Isothermal normalizing furnace

4、Isothermal normalizing furnace field real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Isothermal normalizing furnacet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Isothermal normalizing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks beautiful.。

5、Isothermal normalizing furnace real shot picture

Excellent material selection,the product looks atmospheric., trustworthy, panoramic shooting, helpful for customer reference.。

Isothermal normalizing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、One-combustion energy saving's strength

The company has many years of Isothermal normalizing furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Isothermal normalizing furnacein the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the main features are energy saving and environmental protection, Easy to control, Easy to maintain, energy-efficient and Stable and reliable，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。