What is a Adjustable heat treatment industrial furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Adjustable heat treatment industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，usually used in pharmacy, petroleum, chemical industry, heat treatment, Machinery manufacturing and other fields，the main structure includes Radiation chamber, convection chamber, furnace chamber, ventilation system, combustor and so on，This productThe overall structural design is simple and novel.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。

1、Brief introduction of Adjustable heat treatment industrial furnace

Adjustable heat treatment industrial furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，multifunctional, with functions such as temper, hardening and tempering, Casting heating, normalizing and heat treatment，customizable。

Adjustable heat treatment industrial furnace

2、Adjustable heat treatment industrial furnace use

The purpose of Adjustable heat treatment industrial furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Adjustable heat treatment industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Adjustable heat treatment industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The Adjustable heat treatment industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Adjustable heat treatment industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Energy conservation and environmental protection

The Adjustable heat treatment industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Adjustable heat treatment industrial furnace

3、Adjustable heat treatment industrial furnace HD real picture

One-combustion energy saving Adjustable heat treatment industrial furnacethe product looks atmospheric., the following is a panoramic shot of the Adjustable heat treatment industrial furnace for your reference.。

Adjustable heat treatment industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Adjustable heat treatment industrial furnace structure

The Adjustable heat treatment industrial furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Adjustable heat treatment industrial furnace

5、Adjustable heat treatment industrial furnace price concessions

The Adjustable heat treatment industrial furnace price is introduced as follows:

1. Different regions

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving address:Shandong(Province), where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

2. Brand strength

At present, there are various brands of Adjustable heat treatment industrial furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Adjustable heat treatment industrial furnace are different.

3. Product configuration difference

The difference in Adjustable heat treatment industrial furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

4. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Adjustable heat treatment industrial furnace

6、One-combustion energy saving introduced

Shandong yiran energy-saving environment protection co., ltd, located in Jinan, Shandong province, is a large Adjustable heat treatment industrial furnace manufacturer. The Adjustable heat treatment industrial furnace produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

One-combustion energy saving

Adjustable heat treatment industrial furnaceis a kind of high quality and low price Adjustable heat treatment industrial furnace，widely used inelectron,heat treatment,material,petroleum,Household necessities and other industries。