Introduction to Forging steel heating furnace and Forging furnace structure principle

Forging steel heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a common Forging steel heating furnace，it has the characteristics of Strong adaptability, Easy to control, energy saving and environmental protection, Easy to maintain and Stable and reliable，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，the main structure includes ventilation system, ventilation system, recovery of waste heat, recovery of waste heat and ventilation system，Forging steel heating furnaceSimple structure and advanced technology.。The following is to introduce the Forging steel heating furnace:

1、Brief introduction of Forging steel heating furnace

Forging steel heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Forging steel heating furnace

2、Forging steel heating furnace structure composition

The Forging steel heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Forging steel heating furnace

3、Advantages of Forging steel heating furnace principle

Forging steel heating furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is usually composed of ventilation system, furnace chamber, recovery of waste heat, combustor and Radiation chamber，the product looks beautiful.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，features include energy-efficient, Easy to control, Strong adaptability, energy-efficient and Stable and reliable。

Forging steel heating furnace

4、Forging steel heating furnace video

Speak directly with facts on the spot。

Forging steel heating furnace

As you can see from the live video.，One-combustion energy saving widely used inmetallurgy,war industry,machinery,petroleum,building materials and other industries。

5、Forging steel heating furnace HD picture real shot

Exquisite design, advanced technology and complete sizes and models are available for customers to choose at will.。

Forging steel heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Forging steel heating furnace function

Forging steel heating furnaceit has the functions of anneal, hardening and tempering, Forging heating, Casting heating and quench，the product looks atmospheric.，is a Forging steel heating furnace，it can be used in metallurgy, war industry, pharmacy, electron, Machinery manufacturing and other industries，Commonly used inMetal tempering,Metal forging heating,Metal heat treatment,Metal melting and casting,Improve production efficiency and so on。

Forging steel heating furnace

Forging steel heating furnacemultifunctional, with functions such as hardening and tempering, Forging heating, normalizing, temper and anneal，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，The structural design is simple, novel and special.，it mainly includes Radiation chamber, combustor, furnace chamber, convection chamber and ventilation system。