Introduction to Denitrification of flue gas from circular furnace in steel plant, introduction to SCR denitration function advantages and characteristics

Denitrification of flue gas from circular furnace in steel plantthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，in the course of work,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of flue gas from circular furnace in steel plant technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Denitrification of flue gas from circular furnace in steel plant technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification of flue gas from circular furnace in steel plant technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Denitrification of flue gas from circular furnace in steel plant technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of flue gas from circular furnace in steel plant technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.，generally, it is composed of Temperature control and monitoring system, control system, Catalyst reactor, Flue gas mixing and distribution system, Catalyst supply system and other major components，Mature and stable technology,Less secondary pollution,Environmental protection and pollution-free,Stable operation,energy saving and environmental protection。

1、Brief introduction of Denitrification of flue gas from circular furnace in steel plant

Denitrification of flue gas from circular furnace in steel plantdelective catalytic reduction technology is an efficient flue gas denitrification technology.。

Denitrification of flue gas from circular furnace in steel plant

2、Denitrification of flue gas from circular furnace in steel plant HD real picture

High-definition map of Denitrification of flue gas from circular furnace in steel plant is displayed, and the high-definition map of factory area is taken by One-combustion energy saving for reference of our customers.。

Denitrification of flue gas from circular furnace in steel plant

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Denitrification of flue gas from circular furnace in steel plant principle

Denitrification of flue gas from circular furnace in steel plantCatalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.。

Denitrification of flue gas from circular furnace in steel plant

4、Denitrification of flue gas from circular furnace in steel plant introduction video

Speak directly with facts on the spot。

Denitrification of flue gas from circular furnace in steel plant

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd features include Economically feasible, Strong adaptability, Promote sustainable development, Mature technology and Good selectivity。

5、Denitrification of flue gas from circular furnace in steel plant function

Denitrification of flue gas from circular furnace in steel plantit has the functions of Improve working conditions, Improve energy efficiency, Promote sustainable development, environmental protection and Improve working conditions，the product looks atmospheric.。

Denitrification of flue gas from circular furnace in steel plant

6、How much is the Denitrification of flue gas from circular furnace in steel plant?

The Denitrification of flue gas from circular furnace in steel plant price is introduced as follows:

1. product model

Because there are many models of each product, different customers have different requirements for product performance, and the product specifications and models that are inevitably used will be different. Different models of the same product will lead to different prices.

2. technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

3. deploy

Usually, the quotation of Denitrification of flue gas from circular furnace in steel plant changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. region

The price of Denitrification of flue gas from circular furnace in steel plant in Jinan, Shandong province is much lower than that in other regions, and One-combustion energy saving is a large enterprise specializing in the production and manufacture of Denitrification of flue gas from circular furnace in steel plant not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Denitrification of flue gas from circular furnace in steel plant price positioning more reasonable, low-cost and economical.

Denitrification of flue gas from circular furnace in steel plant

Denitrification of flue gas from circular furnace in steel plantthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，it can be used in building materials, coal-fired power station, metallurgy, cement plant, iron and steel plant and other industries。