Introduction to Heating furnace denitrification system and SCR flue gas denitrification structure principle

Heating furnace denitrification systemdelective catalytic reduction technology is an efficient flue gas denitrification technology.，low in price。The following is to introduce the Heating furnace denitrification system:

1、Brief introduction of Heating furnace denitrification system

Heating furnace denitrification systemthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.。

Heating furnace denitrification system

2、Heating furnace denitrification system real beat

The beauty of Heating furnace denitrification system comes from the detail design.。

Heating furnace denitrification system

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Heating furnace denitrification system structure composition

The Heating furnace denitrification system structure is introduced as follows:

1. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

2. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

3. control system

The whole Heating furnace denitrification system is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

4. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

5. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

Heating furnace denitrification system

4、Heating furnace denitrification system use

Heating furnace denitrification systemIt can be used for Improve product quality, Flue gas denitrification, environmental protection, Promote sustainable development, Meet the requirements of environmental protection, Improve product quality and so on，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Heating furnace denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Heating furnace denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Heating furnace denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Heating furnace denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Heating furnace denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Heating furnace denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.，multifunctional, with functions such as Improve working conditions, environmental protection, Promote sustainable development, Improve energy efficiency and Promote sustainable development，it is mainly composed of Catalyst reactor, Temperature control and monitoring system, Flue gas mixing and distribution system, Catalyst supply system and control system，it is an ideal choice for customers to buy Heating furnace denitrification system。

Heating furnace denitrification system

5、Heating furnace denitrification system performance advantage

The advantages of Heating furnace denitrification system are as follows:

1. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Heating furnace denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

2. Intelligent control and convenience of operation

The Heating furnace denitrification system has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Heating furnace denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

3. Wide applicability

Heating furnace denitrification system technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Heating furnace denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

4. Environmental friendliness

The by-products produced by Heating furnace denitrification system technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Heating furnace denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

5. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Heating furnace denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

Heating furnace denitrification system

6、How much is the Heating furnace denitrification system?

The Heating furnace denitrification system price is introduced as follows:

1. Quality advantages and disadvantages

The price of Heating furnace denitrification system is affected by the quality of products. Only when the products are of good quality can we create greater profits for customers and recover the costs for customers as soon as possible. However, products with good quality have a lot of investment in technology, manpower and time, so their prices are higher than those of ordinary products. On the contrary, the products of general quality are equal in effort and gain, and the sales price is also low. But there are exceptions. Many manufacturers often adopt the mode of small profits but quick turnover. If customers can choose products with high cost performance, it is a good choice for long-term investment.

2. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Heating furnace denitrification system price and service can meet the actual needs of customers.

3. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

4. market supply and demand

Market supply and demand is the inevitable law of market development, with more market supply, less demand and lower product prices; The market supply is small, and people's demand is large. "Things are scarce and expensive", the product price will increase accordingly, and the price of One-combustion energy saving Heating furnace denitrification system will also conform to this market law.

5. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

Heating furnace denitrification system

Heating furnace denitrification systemis an efficient, stable and environment-friendly flue gas denitrification technology.，There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Heating furnace denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Heating furnace denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Heating furnace denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Heating furnace denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Technology has been developed and applied for many years, and it is mature and stable. The Heating furnace denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Heating furnace denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.，the main features are energy saving and environmental protection, Promote sustainable development, Stable operation, Strong adaptability and Economically feasible。