What is a Catalyst oxidation denitrification system? Introduction to the principle of SCR denitration system structure

Catalyst oxidation denitrification systemis an efficient, stable and environment-friendly flue gas denitrification technology.，is based on One-combustion energy saving is an advanced Catalyst oxidation denitrification system developed by our company in combination with the actual situation of the industry。The following is to introduce the Catalyst oxidation denitrification system:

1、Brief introduction of Catalyst oxidation denitrification system

Catalyst oxidation denitrification systemdelective catalytic reduction technology is an efficient flue gas denitrification technology.。

Catalyst oxidation denitrification system

2、Catalyst oxidation denitrification system field real shot

Haide Catalyst oxidation denitrification system manufacturing factory。

Catalyst oxidation denitrification system

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Catalyst oxidation denitrification system principle

Catalyst oxidation denitrification systemat the start of the operation,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，It has the functions of environmental protection, Promote sustainable development, Improve product quality, Improve product quality and Flue gas denitrification。

Catalyst oxidation denitrification system

4、Catalyst oxidation denitrification system characteristics

The Catalyst oxidation denitrification system features are as follows:

1. High denitration efficiency

The denitration efficiency of Catalyst oxidation denitrification system technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

2. Stable operation and stability

The Catalyst oxidation denitrification system technology runs stably and can meet the requirements of flue gas treatment under different working conditions.

3. Small secondary pollution

The by-products produced in the Catalyst oxidation denitrification system opening process are nitrogen and water vapor, and there is no secondary pollution problem.

4. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

5. Environmental protection

The final products of Catalyst oxidation denitrification system technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

Catalyst oxidation denitrification system

5、How much is the Catalyst oxidation denitrification system?

The Catalyst oxidation denitrification system price is introduced as follows:

1. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Catalyst oxidation denitrification system manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Catalyst oxidation denitrification system price can meet the purchasing needs of customers.

2. geographical position

One-combustion energy savingJinan, the transportation is convenient, and the corresponding cost of transporting Catalyst oxidation denitrification system is low, which reduces the cost of selling Catalyst oxidation denitrification system by manufacturers, and the price will also decrease.

3. Model specification

The same type of products, with different specifications, models and sizes, have different costs, so the quotations to customers naturally vary. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

4. Brand strength

At present, there are various brands of Catalyst oxidation denitrification system in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Catalyst oxidation denitrification system are different.

5. Configuration level

Usually, the quotation of Catalyst oxidation denitrification system changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

Catalyst oxidation denitrification system

6、One-combustion energy saving workshop real shot

The following is the live video of Catalyst oxidation denitrification system designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Catalyst oxidation denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Catalyst oxidation denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Catalyst oxidation denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Catalyst oxidation denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Catalyst oxidation denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Catalyst oxidation denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements. of One-combustion energy savingCatalyst oxidation denitrification system.。

Catalyst oxidation denitrification system

As you can see from the live video.One-combustion energy saving the product looks atmospheric.。

Catalyst oxidation denitrification systemit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，It has a wide range of uses, and is often used inFlue gas denitrification,Improve product quality,environmental protection,Meet the requirements of environmental protection,Flue gas denitrification and so on，The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Catalyst oxidation denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Technology has been developed and applied for many years, and it is mature and stable. The Catalyst oxidation denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Catalyst oxidation denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Catalyst oxidation denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Catalyst oxidation denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Catalyst oxidation denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.。