Introduction to Square Well Annealing Furnace and heating furnace structure principle

Square Well Annealing FurnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is an ideal choice for customers to buy Square Well Annealing Furnace。

1、Brief introduction of Square Well Annealing Furnace

Square Well Annealing FurnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It has the functions of Metal forging heating, Energy conservation and environmental protection, Metal heat treatment, Metal tempering and Metal melting and casting，The overall structural design is relatively simple and compact.，it is usually composed of ventilation system, ventilation system, convection chamber, convection chamber and Radiation chamber。

Square Well Annealing Furnace

2、Introduction of Square Well Annealing Furnace characteristics

Square Well Annealing Furnace has the following characteristics

1. Easy to maintain

The structural design of the Square Well Annealing Furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Square Well Annealing Furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Strong adaptability

The Square Well Annealing Furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Square Well Annealing Furnace

3、Functional advantages of Square Well Annealing Furnace

Square Well Annealing Furnaces have the following advantages.

1. Extend the service life of equipment

The Square Well Annealing Furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Uniform heating

The Square Well Annealing Furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Efficient combustion

The Square Well Annealing Furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Extend the service life of equipment

The Square Well Annealing Furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Wide application range

The Square Well Annealing Furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Square Well Annealing Furnace

4、Structural characteristics of Square Well Annealing Furnace

The Square Well Annealing Furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Radiation chamber

The heat load of the main place for Square Well Annealing Furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Square Well Annealing Furnace

5、Square Well Annealing Furnace price advantage

The Square Well Annealing Furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. technology content

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

3. Self quality

The quality of products provided by different manufacturers is different, so their prices will be different. Generally, large manufacturers provide products with higher quality, and the cost of technology and materials is more, so the price is relatively high. However, such products have better use effect and can bring longer-term benefits to customers.

4. sales mode

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Square Well Annealing Furnace is low.

5. Product technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Square Well Annealing Furnace

6、One-combustion energy saving introduced

One-combustion energy saving is a strong and professional Square Well Annealing Furnace manufacturer, with advanced Square Well Annealing Furnace production technology and rich production experience. It will not only provide users with Square Well Annealing Furnace with energy-efficient, but also provide users with complete pre-sales, in-sales and after-sales services for the benefit of users. Welcome new and old users to visit and buy.。

One-combustion energy saving

Square Well Annealing Furnacethe product looks beautiful.，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。