What is a Stick type heat treatment furnace? Forging furnace specifications, models, and parameters

Stick type heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the main features are Strong adaptability, energy-efficient, Strong adaptability, Easy to maintain and Easy to control，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。The following is to introduce the Stick type heat treatment furnace:

1、Brief introduction of Stick type heat treatment furnace

Stick type heat treatment furnaceIt is a forging heating device using gas as fuel.，the product looks beautiful.。

Stick type heat treatment furnace

2、Stick type heat treatment furnace field real shot

The Stick type heat treatment furnace has a beautiful appearance and atmosphere for our customers' reference.。

Stick type heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Stick type heat treatment furnace characteristics

The Stick type heat treatment furnace features are as follows:

1. Easy to maintain

The structural design of the Stick type heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Stick type heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Easy to control

The combustion system and ventilation system of the Stick type heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Strong adaptability

The Stick type heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Efficient heating

The Stick type heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Stick type heat treatment furnace

4、Introduction of advantages of Stick type heat treatment furnace

Stick type heat treatment furnaces have the following advantages.

1. easy to operate

The operation interface of the Stick type heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Rapid temperature rise

The Stick type heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Uniform heating

The Stick type heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Intelligent control

The Stick type heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Stick type heat treatment furnace

5、Stick type heat treatment furnace structure composition

The Stick type heat treatment furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Stick type heat treatment furnace

6、Real-time shooting in One-combustion energy saving's production workshop

The finished products of the Stick type heat treatment furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Stick type heat treatment furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Stick type heat treatment furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a Stick type heat treatment furnace。