What is a Environmental protection chain furnace? Introduction to the Working Principle of heating furnace

Environmental protection chain furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks beautiful.，reliable quality，The price is more affordable。

1、Brief introduction of Environmental protection chain furnace

Environmental protection chain furnaceIt is a forging heating device using gas as fuel.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Environmental protection chain furnace

2、Environmental protection chain furnace structure

The Environmental protection chain furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. furnace chamber

A space for holding metallic materials for heating.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Environmental protection chain furnace

3、Environmental protection chain furnace function

Environmental protection chain furnaceit has the functions of Forging heating, Forging heating, temper, normalizing and heat treatment。

Environmental protection chain furnace

4、Environmental protection chain furnace use

The purpose of Environmental protection chain furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Environmental protection chain furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Environmental protection chain furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Environmental protection chain furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Environmental protection chain furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal heat treatment

In addition to forging heating, Environmental protection chain furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Environmental protection chain furnace

5、Environmental protection chain furnace display

Overview of high-definition pictures,the product looks atmospheric., different specifications and models。

Environmental protection chain furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Environmental protection chain furnace principle

Environmental protection chain furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a kind of Environmental protection chain furnace manufactured by One-combustion energy saving。

Environmental protection chain furnace

Environmental protection chain furnacethe main structure includes ventilation system, convection chamber, ventilation system, furnace chamber and ventilation system，is a Environmental protection chain furnace。