Introduction to Regenerative chain grate furnace, introduction to heating furnace function advantages and characteristics

Regenerative chain grate furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the main structure includes Radiation chamber, recovery of waste heat, ventilation system, convection chamber and furnace chamber，This Regenerative chain grate furnaceSimple structure and reliable operation.，is a popular Regenerative chain grate furnace，it has the functions of Casting heating, normalizing, anneal, quench and hardening and tempering，Cheap and high quality。

1、Brief introduction of Regenerative chain grate furnace

Regenerative chain grate furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is an advanced Regenerative chain grate furnace developed by our company in combination with the actual situation of the industry。

Regenerative chain grate furnace

2、Regenerative chain grate furnace advantage

The advantages of Regenerative chain grate furnace are as follows:

1. Uniform heating

The Regenerative chain grate furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Efficient combustion

The Regenerative chain grate furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. easy to operate

The operation interface of the Regenerative chain grate furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Multiple fuel options

Although the Regenerative chain grate furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Regenerative chain grate furnace

3、Regenerative chain grate furnace use

The purpose of Regenerative chain grate furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Regenerative chain grate furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative chain grate furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal forging heating

The Regenerative chain grate furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Regenerative chain grate furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Regenerative chain grate furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Regenerative chain grate furnace

4、Regenerative chain grate furnace characteristics

The Regenerative chain grate furnace features are as follows:

1. Easy to maintain

The structural design of the Regenerative chain grate furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Regenerative chain grate furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Efficient heating

The Regenerative chain grate furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Regenerative chain grate furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Regenerative chain grate furnace

5、Regenerative chain grate furnace principle

Regenerative chain grate furnacein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Regenerative chain grate furnace

6、One-combustion energy saving service

One-combustion energy saving manufacturer services include three aspects: pre-sale, in-sale and after-sale. Each stage is closely connected with each other, sincerely serving each customer, focusing on customer needs, providing customers with product knowledge training and regularly repairing products for customers, etc., which has been appreciated by new and old customers.。

One-combustion energy saving

Regenerative chain grate furnacemultifunctional, with functions such as Forging heating, Casting heating, anneal, hardening and tempering and quench，it has the functions of heat treatment, temper, normalizing, Forging heating and Casting heating。