Introduction to Double beam walking heat treatment furnace, how much is the price of the Forging furnace?

Double beam walking heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is carefully developed by One-combustion energy saving combined with advanced technology。

1、Brief introduction of Double beam walking heat treatment furnace

Double beam walking heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a common Double beam walking heat treatment furnace，the main structure includes furnace chamber, Radiation chamber, ventilation system, convection chamber, ventilation system and so on，This productThe structural design is simple, novel and special.。

Double beam walking heat treatment furnace

2、Double beam walking heat treatment furnace principle

Double beam walking heat treatment furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is widely used inmachinery,petroleum,Household necessities,Machinery manufacturing,electron and other industries，Mainly used forMetal tempering,Improve production efficiency,Metal forging heating,Improve production efficiency andMetal melting and casting。

Double beam walking heat treatment furnace

3、Introduction of advantages of Double beam walking heat treatment furnace

Double beam walking heat treatment furnaces have the following advantages.

1. Improve product quality

Because the Double beam walking heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Extend the service life of equipment

The Double beam walking heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Wide application range

The Double beam walking heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Uniform heating

The Double beam walking heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Rapid temperature rise

The Double beam walking heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Double beam walking heat treatment furnace

4、Structural advantages of Double beam walking heat treatment furnace

The Double beam walking heat treatment furnace has the following structure

1. Radiation chamber

The heat load of the main place for Double beam walking heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Double beam walking heat treatment furnace

5、Double beam walking heat treatment furnace performance advantage

The advantages of Double beam walking heat treatment furnace are as follows:

1. Rapid temperature rise

The Double beam walking heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Intelligent control

The Double beam walking heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. easy to operate

The operation interface of the Double beam walking heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Multiple fuel options

Although the Double beam walking heat treatment furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Double beam walking heat treatment furnace can significantly reduce energy consumption, thus reducing operating costs.

Double beam walking heat treatment furnace

6、Company selection

Choosing a suitable Double beam walking heat treatment furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Double beam walking heat treatment furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Double beam walking heat treatment furnaceis a popular Double beam walking heat treatment furnace，it has the functions of quench, temper, normalizing, Casting heating and Forging heating。